[8dvd]flash网站源文件 flash整站源码,正规挣钱最快的游戏,超市网站模板,什么是网站静态化目录
前言
1. 安装docker
2. 安装要求
3.准备网络#xff08;如果只装单机版可跳过此部#xff09;
4. 准备工作
5. 安装
5.1. 配置阿里云yum k8s源
5.2 安装kubeadm、kubectl和kubelet
5.3 初始化#xff0c;只在master执行#xff0c;子节点不要执行
5.3.1 一些…目录
前言
1. 安装docker
2. 安装要求
3.准备网络如果只装单机版可跳过此部
4. 准备工作
5. 安装
5.1. 配置阿里云yum k8s源
5.2 安装kubeadm、kubectl和kubelet
5.3 初始化只在master执行子节点不要执行
5.3.1 一些错误没有错误直接忽略
5.4 使用kubectl工具
5.5 子节点加入单机版可忽略
5.6 部署CNI网络插件
6. 扩展 前言 只针对1.24版本以前的k8s, 1.24版本以后删除了内置dockershim插件原生不再支持docker运行时需要使用第三方cri接口cri-docker
1. 安装docker
看我上一篇博客
CentOS安装docker及一些命令https://blog.csdn.net/o_CanDou6/article/details/135505341
2. 安装要求
内存大于等于2GCPU大于等于2核硬盘大于等于30G。禁止swap分区。
3.准备网络如果只装单机版可跳过此部
新安装的Centos服务器需要配置静态网络 打开网络配置文件
vi /etc/sysconfig/network-scripts/ifcfg-enp0s3
将以下内容添加进去其中BOOTPROTOstatic表示静态网络NAME和DEVICE填网卡驱动如果没有驱动需要手动安装即可下面添加IP、子网掩码以及网关、DNS等内容。
TYPEEthernet
PROXY_METHODnone
BROWSER_ONLYno
BOOTPROTOstatic #需要修改
DEFROUTEyes
IPV4_FAILURE_FATALno
IPV6INITyes
IPV6_AUTOCONFyes
IPV6_DEFROUTEyes
IPV6_FAILURE_FATALno
NAMEenp0s3
UUID5c84522d-4102-4260-9a23-4121bd510252
DEVICEenp0s3
ONBOOTyes
IPADDR192.168.2.159 #修改固定ip
NETMASK255.255.255.0 #同步修改
GATEWAY192.168.2.1 #同步修改
DNS1192.168.2.1 #同步修改
准备了两个虚拟机当做演示ip地址如下按自己的ip为准
角色名称IP主节点master192.168.2.159子节点node1192.168.2.64
4. 准备工作
#永久关闭防火墙
systemctl stop firewalld
systemctl disable firewalld#永久关闭swap
sed -ri s/.*swap.*/#/ /etc/fstab# 单机可以不执行如下命令
## 二台服务器设置主机名
hostnamectl set-hostname hostname## 修改hosts
vi /etc/hosts# 加入如下数据 按自己ip增加
192.168.2.159 master
192.168.2.64 node1
5. 安装
5.1. 配置阿里云yum k8s源
vi /etc/yum.repos.d/kubernetes.repo[kubernetes]
nameKubernetes
baseurlhttps://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled1
gpgcheck1
repo_gpgcheck1
gpgkeyhttps://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
可查看k8s版本信息
yum list kubelet --showduplicates | sort -r 我们以1.21.0版本为例 注意k8s版本需要对于特定的docker版本不然安装不成功
以下是一些常见的k8s与Docker版本对应关系
k8s v1.22.x 对应 Docker 20.10.xk8s v1.21.x 对应 Docker 20.10.xk8s v1.20.x 对应 Docker 19.03.x
5.2 安装kubeadm、kubectl和kubelet
yum install -y kubelet-1.21.0 kubeadm-1.21.0 kubectl-1.21.0systemctl enable kubelet
5.3 初始化只在master执行子节点不要执行
# --apiserver-advertise-address本机ip
kubeadm init --kubernetes-version1.21.0 --pod-network-cidr10.244.0.0/16 --apiserver-advertise-address[本机ip] --ignore-preflight-errorsall --image-repositoryregistry.aliyuncs.com/google_containers
5.3.1 一些错误没有错误直接忽略 [WARNING FileExisting-tc]: tc not found in system path 错误 # 解决方法
yum install iproute-tc -y [WARNING ImagePull]: failed to pull image registry.aliyuncs.com/google_containers/coredns/coredns:v1.8.0: output: Error response from daemon: pull access denied for registry.aliyuncs.com/google_containers/coredns/coredns, repository does not exist or may require docker login: denied: requested access to the resource is denied , error: exit status 1 # 解决方法
docker pull coredns/coredns:latest
docker tag coredns/coredns:latest registry.aliyuncs.com/google_containers/coredns/coredns:v1.8.0
5.4 使用kubectl工具
执行完毕后会出现如下内容红框内容在master本机上执行蓝框的在子节点上执行加入集群 mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
执行完可以查看节点了
kubectl get nodes 现在只有自己
5.5 子节点加入单机版可忽略
子节点不需要执行5.3 初始化的内容只执行master输出的 kubeadm join 命令加入集群即可 # 执行自己的输出内容不要复制内容不同 kubeadm join 192.168.2.159:6443 --token e5doub.g27604rf65vj02yr \ --discovery-token-ca-cert-hash sha256:2521d2d4ee37750feba14a00ef0de0dfc390b1141f7abda81b0e259ce01870af 子节点执行完后再次查看节点 子节点加入进来了但是这时候子节点还不能使用需要把master服务器/etc/kubernetes/admin.conf复制到子节点的/etc/kubernetes/文件夹中
然后再子节点中执行
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
现在子节点可以正常使用了
5.6 部署CNI网络插件
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
访问不到的可以复制如下内容自己创建文件 使用 kubectl apply -f 执行
---
kind: Namespace
apiVersion: v1
metadata:name: kube-flannellabels:k8s-app: flannelpod-security.kubernetes.io/enforce: privileged
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:labels:k8s-app: flannelname: flannel
rules:
- apiGroups:- resources:- podsverbs:- get
- apiGroups:- resources:- nodesverbs:- get- list- watch
- apiGroups:- resources:- nodes/statusverbs:- patch
- apiGroups:- networking.k8s.ioresources:- clustercidrsverbs:- list- watch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:labels:k8s-app: flannelname: flannel
roleRef:apiGroup: rbac.authorization.k8s.iokind: ClusterRolename: flannel
subjects:
- kind: ServiceAccountname: flannelnamespace: kube-flannel
---
apiVersion: v1
kind: ServiceAccount
metadata:labels:k8s-app: flannelname: flannelnamespace: kube-flannel
---
kind: ConfigMap
apiVersion: v1
metadata:name: kube-flannel-cfgnamespace: kube-flannellabels:tier: nodek8s-app: flannelapp: flannel
data:cni-conf.json: |{name: cbr0,cniVersion: 0.3.1,plugins: [{type: flannel,delegate: {hairpinMode: true,isDefaultGateway: true}},{type: portmap,capabilities: {portMappings: true}}]}net-conf.json: |{Network: 10.244.0.0/16,Backend: {Type: vxlan}}
---
apiVersion: apps/v1
kind: DaemonSet
metadata:name: kube-flannel-dsnamespace: kube-flannellabels:tier: nodeapp: flannelk8s-app: flannel
spec:selector:matchLabels:app: flanneltemplate:metadata:labels:tier: nodeapp: flannelspec:affinity:nodeAffinity:requiredDuringSchedulingIgnoredDuringExecution:nodeSelectorTerms:- matchExpressions:- key: kubernetes.io/osoperator: Invalues:- linuxhostNetwork: truepriorityClassName: system-node-criticaltolerations:- operator: Existseffect: NoScheduleserviceAccountName: flannelinitContainers:- name: install-cni-pluginimage: docker.io/flannel/flannel-cni-plugin:v1.2.0command:- cpargs:- -f- /flannel- /opt/cni/bin/flannelvolumeMounts:- name: cni-pluginmountPath: /opt/cni/bin- name: install-cniimage: docker.io/flannel/flannel:v0.24.0command:- cpargs:- -f- /etc/kube-flannel/cni-conf.json- /etc/cni/net.d/10-flannel.conflistvolumeMounts:- name: cnimountPath: /etc/cni/net.d- name: flannel-cfgmountPath: /etc/kube-flannel/containers:- name: kube-flannelimage: docker.io/flannel/flannel:v0.24.0command:- /opt/bin/flanneldargs:- --ip-masq- --kube-subnet-mgrresources:requests:cpu: 100mmemory: 50MisecurityContext:privileged: falsecapabilities:add: [NET_ADMIN, NET_RAW]env:- name: POD_NAMEvalueFrom:fieldRef:fieldPath: metadata.name- name: POD_NAMESPACEvalueFrom:fieldRef:fieldPath: metadata.namespace- name: EVENT_QUEUE_DEPTHvalue: 5000volumeMounts:- name: runmountPath: /run/flannel- name: flannel-cfgmountPath: /etc/kube-flannel/- name: xtables-lockmountPath: /run/xtables.lockvolumes:- name: runhostPath:path: /run/flannel- name: cni-pluginhostPath:path: /opt/cni/bin- name: cnihostPath:path: /etc/cni/net.d- name: flannel-cfgconfigMap:name: kube-flannel-cfg- name: xtables-lockhostPath:path: /run/xtables.locktype: FileOrCreate
6. 扩展
在master安装 recommended.yaml 和 dashboard-adminuser.yml 使用图形界面查看 这两个文件在下方
kubectl apply -f recommended.yaml
kubectl apply -f dashboard-adminuser.yml
安装完成后可以用火狐访问 https://[ip地址]:32508/#/login 如我的为 https://192.168.2.159:32508/#/login
注意不要用高版本Chrome或者edge登录https没有证书访问不了https://[ip地址]:32508/#/login 如我的为 这里需要token执行下面命令获取token
# 获取登录凭证
kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin | awk {print $1}) 粘贴后进入 recommended.yaml
# Copyright 2017 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the License);
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an AS IS BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.apiVersion: v1
kind: Namespace
metadata:name: kubernetes-dashboard---apiVersion: v1
kind: ServiceAccount
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboardnamespace: kubernetes-dashboard---kind: Service
apiVersion: v1
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboardnamespace: kubernetes-dashboard
spec:type: NodePortports:- port: 443targetPort: 8443nodePort: 32508selector:k8s-app: kubernetes-dashboard---apiVersion: v1
kind: Secret
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboard-certsnamespace: kubernetes-dashboard
type: Opaque---apiVersion: v1
kind: Secret
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboard-csrfnamespace: kubernetes-dashboard
type: Opaque
data:csrf: ---apiVersion: v1
kind: Secret
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboard-key-holdernamespace: kubernetes-dashboard
type: Opaque---kind: ConfigMap
apiVersion: v1
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboard-settingsnamespace: kubernetes-dashboard---kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboardnamespace: kubernetes-dashboard
rules:# Allow Dashboard to get, update and delete Dashboard exclusive secrets.- apiGroups: []resources: [secrets]resourceNames: [kubernetes-dashboard-key-holder, kubernetes-dashboard-certs, kubernetes-dashboard-csrf]verbs: [get, update, delete]# Allow Dashboard to get and update kubernetes-dashboard-settings config map.- apiGroups: []resources: [configmaps]resourceNames: [kubernetes-dashboard-settings]verbs: [get, update]# Allow Dashboard to get metrics.- apiGroups: []resources: [services]resourceNames: [heapster, dashboard-metrics-scraper]verbs: [proxy]- apiGroups: []resources: [services/proxy]resourceNames: [heapster, http:heapster:, https:heapster:, dashboard-metrics-scraper, http:dashboard-metrics-scraper]verbs: [get]---kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboard
rules:# Allow Metrics Scraper to get metrics from the Metrics server- apiGroups: [metrics.k8s.io]resources: [pods, nodes]verbs: [get, list, watch]---apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboardnamespace: kubernetes-dashboard
roleRef:apiGroup: rbac.authorization.k8s.iokind: Rolename: kubernetes-dashboard
subjects:- kind: ServiceAccountname: kubernetes-dashboardnamespace: kubernetes-dashboard---apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:name: kubernetes-dashboard
roleRef:apiGroup: rbac.authorization.k8s.iokind: ClusterRolename: kubernetes-dashboard
subjects:- kind: ServiceAccountname: kubernetes-dashboardnamespace: kubernetes-dashboard---kind: Deployment
apiVersion: apps/v1
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboardnamespace: kubernetes-dashboard
spec:replicas: 1revisionHistoryLimit: 10selector:matchLabels:k8s-app: kubernetes-dashboardtemplate:metadata:labels:k8s-app: kubernetes-dashboardspec:securityContext:seccompProfile:type: RuntimeDefaultcontainers:- name: kubernetes-dashboardimage: kubernetesui/dashboard:v2.5.1imagePullPolicy: Alwaysports:- containerPort: 8443protocol: TCPargs:- --auto-generate-certificates- --namespacekubernetes-dashboard# Uncomment the following line to manually specify Kubernetes API server Host# If not specified, Dashboard will attempt to auto discover the API server and connect# to it. Uncomment only if the default does not work.# - --apiserver-hosthttp://my-address:portvolumeMounts:- name: kubernetes-dashboard-certsmountPath: /certs# Create on-disk volume to store exec logs- mountPath: /tmpname: tmp-volumelivenessProbe:httpGet:scheme: HTTPSpath: /port: 8443initialDelaySeconds: 30timeoutSeconds: 30securityContext:allowPrivilegeEscalation: falsereadOnlyRootFilesystem: truerunAsUser: 1001runAsGroup: 2001volumes:- name: kubernetes-dashboard-certssecret:secretName: kubernetes-dashboard-certs- name: tmp-volumeemptyDir: {}serviceAccountName: kubernetes-dashboardnodeSelector:kubernetes.io/os: linux# Comment the following tolerations if Dashboard must not be deployed on mastertolerations:- key: node-role.kubernetes.io/mastereffect: NoSchedule---kind: Service
apiVersion: v1
metadata:labels:k8s-app: dashboard-metrics-scrapername: dashboard-metrics-scrapernamespace: kubernetes-dashboard
spec:ports:- port: 8000targetPort: 8000selector:k8s-app: dashboard-metrics-scraper---kind: Deployment
apiVersion: apps/v1
metadata:labels:k8s-app: dashboard-metrics-scrapername: dashboard-metrics-scrapernamespace: kubernetes-dashboard
spec:replicas: 1revisionHistoryLimit: 10selector:matchLabels:k8s-app: dashboard-metrics-scrapertemplate:metadata:labels:k8s-app: dashboard-metrics-scraperspec:securityContext:seccompProfile:type: RuntimeDefaultcontainers:- name: dashboard-metrics-scraperimage: kubernetesui/metrics-scraper:v1.0.7ports:- containerPort: 8000protocol: TCPlivenessProbe:httpGet:scheme: HTTPpath: /port: 8000initialDelaySeconds: 30timeoutSeconds: 30volumeMounts:- mountPath: /tmpname: tmp-volumesecurityContext:allowPrivilegeEscalation: falsereadOnlyRootFilesystem: truerunAsUser: 1001runAsGroup: 2001serviceAccountName: kubernetes-dashboardnodeSelector:kubernetes.io/os: linux# Comment the following tolerations if Dashboard must not be deployed on mastertolerations:- key: node-role.kubernetes.io/mastereffect: NoSchedulevolumes:- name: tmp-volumeemptyDir: {}
dashboard-adminuser.yml:
apiVersion: v1
kind: ServiceAccount
metadata:name: admin-usernamespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:name: admin-userannotations:rbac.authorization.kubernetes.io/autoupdate: true
roleRef:apiGroup: rbac.authorization.k8s.iokind: ClusterRolename: cluster-admin
subjects:
- kind: ServiceAccountname: admin-usernamespace: kube-system
