360网站收录,推广教程,平面设计案例图片,网站列表页怎么做的HDP 集群搭建
前置安装
yum -y install createrepo
yum install -y lrzsz
yum install -y wget
yum install -y vim修改当前集群机器的主机名
hostnamectl set-hostname XXX 这里的 XXX 就是要设置的当前机器的主机名称。主机名称是集群唯一的#xff0c;一定不要重复一定不要重复
安装基础环境
rpm -qa | grep java rpm -e --nodeps 旧包
mkdir /opt/download /opt/softwareecho export JAVA_HOME/opt/software/jdk1.8.0_311 /etc/profile
echo export PATH$JAVA_HOME/bin:$PATH: /etc/profile配置主机间的映射 - 3
echo 192.168.3.126 hdp3.node1 /etc/hosts
echo 192.168.3.127 hdp3.node2 /etc/hosts
echo 192.168.3.128 hdp3.node3 /etc/hosts
关闭防火墙及selinux - 3
systemctl stop firewalld.service | systemctl disable firewalld.service | systemctl status firewalld.service | setenforce 0 | sed -i s/SELINUXenforcing/SELINUXdisabled/ /etc/selinux/config重启3台机器后进行验证是否修改成功
# sestatus -v
SELinux status: disabled配置ssh互信 - 3
ssh-keygen -t rsa
ssh-copy-id hdp3.node1ssh-copy-id hdp3.node2
ssh-copy-id hdp3.node3配置ntp时钟同步 - 3台
卸载系统原装的chrony
yum -y remove chronyd所有节点安装NTP服务
yum -y install ntp
systemctl restart ntpd
systemctl enable ntpd.service
rpm包检查关闭
sed -i s/gpgcheck1/gpgcheck0/ /etc/yum.conf安装http服务 - 本服务仅安装在解压了安装包的机器上
yum -y install httpd
systemctl start httpd
systemctl enable httpd.service
安装AmbariHDP - 主
cd /opt/download/HDP3.3.2.0-005/
mkdir /var/www/html/ambari
mkdir /var/www/html/HDP
mkdir /var/www/html/HDP-UTILS
mkdir /var/www/html/HDP-GPL
tar -zxvf ambari-2.7.6.0-25-redhat7-x86_64.tar.gz -C /var/www/html/ambari
tar -zxvf HDP-3.3.2.0-005-redhat789-x86_64-2.tar.gz -C /var/www/html/HDP
tar -zxvf HDP-UTILS-1.1.0.22-centos7_8-x86_64.tar.gz -C /var/www/html/HDP-UTILS/
tar -zxvf HDP-GPL-3.3.2.0-005-redhat789-x86_64.tar.gz -C /var/www/html/HDP-GPL/
cd /var/www/html/
chown -R root:root HDP
chown -R root:root HDP-GPL
chown -R root:root HDP-UTILS
chmod -R 755 HDP
chmod -R 755 HDP-GPL
chmod -R 755 HDP-UTILScreaterepo /var/www/html/ambari/2.7.6.0-25/
安装mariadb - 主
rpm -qa |grep -i mysql
rpm -qa |grep -i mariadb
rpm -e --nodeps 旧包
yum install mariadb-server -ysystemctl enable mariadb
systemctl start mariadb# 初始化 mariadb
/usr/bin/mysql_secure_installation
按照以下过程进行 mariadb 的初始化操作
[...]
Enter current password for root (enter for none):
OK, successfully used password, moving on...
[...]
Set root password? [Y/n] Y
New password:123456
Re-enter new password:123456
[...]
Remove anonymous users? [Y/n] Y
[...]
Disallow root login remotely? [Y/n] N
[...]
Remove test database and access to it [Y/n] Y
[...]
Reload privilege tables now? [Y/n] Y
[...]
All done! If youve completed all of the above steps, your MariaDB 18 installation should now be secure.
Thanks for using MariaDB!
初始化完成后开始准备 mariadb 连接器
mkdir /usr/share/java/
# 上传mysql连接器
cp mysql-connector-java-5.1.40-bin.jar /usr/share/java/mysql-connector-java.jarGRANT ALL PRIVILEGES ON *.* TO root%WITH GRANT OPTION;
GRANT ALL PRIVILEGES ON *.* TO root% IDENTIFIED BY 123456;FLUSH PRIVILEGES;
# 如果需要ranger编辑以下⽂件 vi /etc/my.cnf 并添加以下⾏
# vi /etc/my.cnfecho log_bin_trust_function_creators 1 /etc/my.cnf
# 重启并登陆
systemctl restart mariadb
mysql -uroot -p123456
制作本地源 - 3台机器
这里需要注意baseurl 属性所对应的 http 地址就是之前我们安装 http 服务的机器。路径就是将 /var/www/http/ 替换为 http://hostname/ 后续路径不变。
touch /etc/yum.repos.d/ambari.repoecho [Ambari] /etc/yum.repos.d/ambari.repo
echo nameambari /etc/yum.repos.d/ambari.repo
echo baseurlhttp://hdp3.node1/ambari/2.7.6.0-25/ /etc/yum.repos.d/ambari.repo
# 重新创建 Yum 源
yum clean all
yum makecatch
yum repolist
安装和配置ambari-server - 主
mkdir -p /var/lib/ambari-server/resources/
yum install -y ambari-server --nogpgcheckcp /usr/share/java/mysql-connector-java.jar /var/lib/ambari-server/resources/# --------------------------------- 添加
# vim /etc/ambari-server/conf/ambari.properties
echo server.jdbc.driver.path/usr/share/java/mysql-connector-java.jar /etc/ambari-server/conf/ambari.properties
ambari-server setup --jdbc-dbmysql --jdbc-driver/usr/share/java/mysql-connector-java.jar
初始化ambari-server - 主
登录mariadb创建ambari安装所需要的库
mysql -uroot -pRhein.2023
CREATE DATABASE ambari;
use ambari; set global validate_password_policy0;
set global validate_password_length1;CREATE USER ambari% IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO ambari%;
CREATE USER ambarilocalhost IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO ambarilocalhost;
CREATE USER ambarihdp3.node1 IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO ambarihdp3.node1; source /var/lib/ambari-server/resources/Ambari-DDL-MySQL-CREATE.sqlshow tables;
use mysql;
select host,user from user where userambari;
CREATE DATABASE hive;
use hive;
CREATE USER hive% IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO hive%;
CREATE USER hivelocalhost IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO hivelocalhost;
CREATE USER hivehdp3.node1 IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO hivehdp3.node1; CREATE DATABASE oozie;
use oozie;
CREATE USER oozie% IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO oozie%;
CREATE USER oozielocalhost IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO oozielocalhost;
CREATE USER ooziehdp3.node1 IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO ooziehdp3.node1; CREATE DATABASE hue;
use hue;
CREATE USER hue% IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO hue%;
CREATE USER huelocalhost IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO huelocalhost;
CREATE USER huehdp3.node1 IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO huehdp3.node1; CREATE DATABASE dolphinscheduler;
use dolphinscheduler;
CREATE USER dolphinscheduler% IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO dolphinscheduler%;
CREATE USER dolphinschedulerlocalhost IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO dolphinschedulerlocalhost;
CREATE USER dolphinschedulerhdp3.node1 IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO dolphinschedulerhdp3.node1; CREATE DATABASE druid;
use druid;
CREATE USER druid% IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO druid%;
CREATE USER druidlocalhost IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO druidlocalhost;
CREATE USER druidhdp3.node1 IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO druidhdp3.node1; CREATE DATABASE superset;
use superset;
CREATE USER superset% IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO superset%;
CREATE USER supersetlocalhost IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO supersetlocalhost;
CREATE USER supersethdp3.node1 IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO supersethdp3.node1; CREATE DATABASE ranger;
use ranger;
CREATE USER rangeradmin% IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO rangeradmin%;
CREATE USER rangeradminlocalhost IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO rangeradminlocalhost;
CREATE USER rangeradminhdp3.node1 IDENTIFIED BY 123456;
GRANT ALL PRIVILEGES ON *.* TO rangeradminhdp3.node1; FLUSH PRIVILEGES;
service mysqld restartambari-server setup# 1 提示是否自定义设置。输入y
Customize user account for ambari-server daemon [y/n] (n)? y
#2ambari-server 守护进程账号。如果直接回车就是默认选择root用户
Enter user account for ambari-server daemon (root):
Adjusting ambari-server permissions and ownership...
#3检查防火墙是否关闭
Adjusting ambari-server permissions and ownership...
Checking firewall...
WARNING: iptables is running. Confirm the necessary Ambari ports are accessible. Refer to the Ambari documentation for more details on ports.
OK to continue [y/n] (y)?
# 直接回车
Checking JDK...
Do you want to change Oracle JDK [y/n] (n)? y
[1] Oracle JDK 1.8 Java Cryptography Extension (JCE) Policy Files 8
[2] Custom JDK
#
#4设置JDK。输入2
Enter choice (1): 2
WARNING: JDK must be installed on all hosts and JAVA_HOME must be valid on all hosts.
WARNING: JCE Policy files are required for configuring Kerberos security. If you plan to use Kerberos,please make sure JCE Unlimited Strength Jurisdiction Policy Files are valid on all hosts.
# 如果上面选择 2 自定义JDK,则需要设置JAVA_HOME。输入/opt/software/jdk1.8.0_311
Path to JAVA_HOME: /apps/software/jdk1.8.0_311
Validating JDK on Ambari Server...done.GPL License for LZO: https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
# 是否安装 GPL
Enable Ambari Server to download and install GPL Licensed LZO packages [y/n] (n)? yCompleting setup...
Configuring database...
#5数据库配置。选择y
Enter advanced database configuration [y/n] (n)? y
Configuring database...
#
Choose one of the following options:
[1] - PostgreSQL (Embedded)
[2] - Oracle
[3] - MySQL/ MariaDB
[4] - PostgreSQL
[5] - Microsoft SQL Server (Tech Preview)
[6] - SQL Anywhere
#
#6选择数据库类型。输入3
Enter choice (3): 3
#7设置数据库的具体配置信息根据实际情况输入如果和括号内相同则可以直接回车。如果想重命名就输入。
Hostname (localhost):node1
Port (3306): 3306
Database name (ambari): ambari
Username (ambari): ambari
Enter Database Password (bigdata):123456
Re-Enter password: 123456
#8将Ambari数据库脚本导入到数据库
WARNING: Before starting Ambari Server, you must run the following DDL against the database to create the schema: /var/lib/ambari-server/resources/Ambari-DDL-MySQL-CREATE.sql 这个sql后面会用到导入数据库
Proceed with configuring remote database connection properties [y/n] (y)? y
启动ambari服务 - 主节点
systemctl start ambari-server
安装ambari-agent - 3台机器
yum -y install ambari-agent --nogpgcheck
systemctl start ambari-agent
sed -i s/hostnamelocalhost/hostnamehdp3.node1/ /etc/ambari-agent/conf/ambari-agent.ini安装 libtirpc-devel - 3
yum -y install libtirpc-develWEB端集群部署
登录界面http://hdp3.node1:8080 默认管理员账户登录 账户admin 密码admin 开始创建相应的集群 在标签 1 的位置输入要创建的集群的名称名称可以任意。
输入完成后点击标签 2 的 next 继续下一步的安装。 1 - 选择版本配置yum源 2 - 选择版本并修改本地源地址 3 - 选HDP-3.1(Default Version Definition); 4 - 选Use Local Repository; 5 - 选redhat7这里因为当前选择的系统是Centos7所以选择 Redhat7 如果此处是安装在其他系统上的就要选择对应的系统:
HDP-3.1: http://hdp3.node4/HDP/3.3.2.0-005/
HDP-3.1-GPL: http://hdp3.node4/HDP-GPL/gpl-3.3.2.0-005/
HDP-UTILS-1.1.0.22: http://hdp3.node4/HDP-UTILS/HDP-UTILS/centos7/1.1.0.22/配置节点和密钥
在主节点执行以下命令
cat /root/.ssh/id_rsa将执行的内容放置到web页面指定位置即可 这里继续点击 CONTINUE 即可 之后就可以看到集群正在安装等待安装成功后点击 NEXT 即可 安装成功后页面如下所示 点击 Next 后出现如下页面 Sqoop
Sqoop访问Hive异常
error:
INFO hive.HiveImport: Connecting to jdbc:hive2://hdp3.node1:2181,hdp3.node2:2181,hdp3.node3:2181/default;serviceDiscoveryModezooKeeper;zooKeeperNamespacehiveserver2ERROR tool.ImportTool: Import failed: java.io.IOException: Hive exited with status 2at org.apache.sqoop.hive.HiveImport.executeExternalHiveScript(HiveImport.java:253)解决方案
1-在 hive 的 conf 目录下创建 beeline-hs2-connection.xml 文件
hdp 的 conf 目录/usr/hdp/3.3.2.0-005/hive/confvim /usr/hdp/3.3.2.0-005/hive/conf/beeline-hs2-connection.xml ?xml version1.0?
?xml-stylesheet typetext/xsl hrefconfiguration.xsl?
configuration
propertynamebeeline.hs2.connection.user/namevaluehive/value
/property
propertynamebeeline.hs2.connection.password/namevaluehive/value
/property
/configuration 2-新建一个存储格式为textfile的临时表
create table hive_db.hive_01( id string comment Id)
row format delimited fields terminated by \001
stored as textFile;3-将数据导入临时表中Sqoop执行的Import写入到临时表中 4-通过查询插入的方式将临时表数据导入目标表
insert overwrite table hive_db.news_detail_hive select * from hive_db.news_detail_hive_01;HDFS 权限检查属性设置
dfs.permissions.enabledyarn 资源只能使用 50%
增加以下属性的值大小默认0.2调整0.3-0.5
yarn.scheduler.capacity.maximum-am-resource-percentHue
默认使用的pg数据库在安装的时候替换成 mysql 及相关的参数即可。 SeaTunnel
需要前置安装 Hue
Dolphin Scheduler
默认登陆用户密码
admin
dolphinscheduler123phoenix连接HBase
/usr/hdp/3.3.2.0-005/phoenix/bin/sqlline.py hdp3.node1:2181API删除服务
curl -u admin:admin -H X-Requested-By: ambari -X PUT -d {RequestInfo: {context:Stop Service},Body:{ServiceInfo:{state:INSTALLED}}} http://hdp3.node4:8080/api/v1/clusters/cluster/services/RANGERhdp3.node1 是 ambari 安装机器cluster 是集群名称RANGER 是服务名称curl -u admin:admin -H X-Requested-By: ambari -X DELETE http://hdp3.node4:8080/api/v1/clusters/cluster/services/RANGERYarn 任务 kill
yarn application -kill application_1704037136405_0001
