当前位置: 首页 > news >正文

江苏个人网站备案要求建设网站 目标

江苏个人网站备案要求,建设网站 目标,网站关键词优化外包,长沙3合1网站建设公司目录 1、各主机进行网络配置。2、交换机配置。3、配置路由交换#xff0c;进行测试。4、配置路由器接口和静态路由#xff0c;进行测试。5、最后测试任意两台主机通信情况 模拟环境链接 拓扑结构 说明#xff1a; VLAN标签在上面的一定是GigabitEthernet接口的#xff0c… 目录 1、各主机进行网络配置。2、交换机配置。3、配置路由交换进行测试。4、配置路由器接口和静态路由进行测试。5、最后测试任意两台主机通信情况 模拟环境链接 拓扑结构 说明 VLAN标签在上面的一定是GigabitEthernet接口的左边的标签是交换机连接左边的接口右边的标签是交换机连接右边的接口。每个交换机有连接三处就划分了三处VLAN。 主机 Host-1的ip为192.168.100.11/24网关为192.168.100.254 Host-2的ip为192.168.101.12/24网关为192.168.101.254 Host-3的ip为192.168.102.21/24网关为192.168.102.254 Host-4的ip为192.168.103.22/24网关为192.168.103.254 Host-5的ip为192.168.104.13/24网关为192.168.104.254 Host-6的ip为192.168.105.14/24网关为192.168.105.254 Host-7的ip为192.168.106.23/24网关为192.168.106.254 Host-8的ip为192.168.107.24/24网关为192.168.107.254。 路由交换 RS-1的VLANIF11接口地址VLAN 11接口地址192.168.100.254/24 RS-1的VLANIF12接口地址VLAN 12接口地址192.168.101.254/24 RS-1的VLANIF100接口地址VLAN 100接口地址10.0.1.1/30 RS-2的VLANIF13接口地址VLAN 13接口地址192.168.102.254/24 RS-2的VLANIF14接口地址VLAN 14接口地址192.168.103.254/24 RS-2的VLANIF100接口地址VLAN 100接口地址10.0.2.1/30 RS-3的VLANIF15接口地址VLAN 15接口地址192.168.104.254/24 RS-3的VLANIF16接口地址VLAN 16接口地址192.168.105.254/24 RS-3的VLANIF100接口地址VLAN 100接口地址10.0.3.1/30 RS-4的VLANIF17接口地址VLAN 17接口地址192.168.106.254/24 RS-4的VLANIF18接口地址VLAN 18接口地址192.168.107.254/24 RS-4的VLANIF100接口地址VLAN 100接口地址10.0.4.1/30。 静态路由规划 RS的下一跳地址都是到对应路由器的接口ip目的地址是0.0.0.0/0。 R-1的下一跳地址为RS-1VLAN 100的地址目的地址为Host-1的地址。 R-1的下一跳地址为RS-2VLAN 100的地址目的地址为Host-3的地址。 R-1的下一跳地址为R-2的GE 0/0/0的地址目的地址为Host-5的地址。 R-2的下一跳地址为R-1的GE 0/0/0的地址目的地址为Host-1的地址。 R-2的下一跳地址为R-3的GE 0/0/0的地址目的地址为Host-5的地址。 R-3的下一跳地址为R-2的GE 0/0/1的地址目的地址为Host-1的地址。 R-3的下一跳地址为RS-3VLAN 100的地址目的地址为Host-5的地址。 R-3的下一跳地址为RS-4VLAN 100的地址目的地址为Host-7的地址。 1、各主机进行网络配置。 2、交换机配置。 Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname SW-1 [SW-1]vlan batch 11 12 Info: This operation may take a few seconds. Please wait for a moment...done. [SW-1]interface Ethernet 0/0/1 [SW-1-Ethernet0/0/1]port link-type access [SW-1-Ethernet0/0/1]port default vlan 11 [SW-1-Ethernet0/0/1]quit [SW-1]interface Ethernet 0/0/2 [SW-1-Ethernet0/0/2]port link-type access [SW-1-Ethernet0/0/2]port default vlan 12 [SW-1-Ethernet0/0/2]quit [SW-1]interface GigabitEthernet 0/0/1 [SW-1-GigabitEthernet0/0/1]port link-type trunk [SW-1-GigabitEthernet0/0/1]port trunk allow-pass vlan 11 12 [SW-1-GigabitEthernet0/0/1]quit [SW-1]quit SW-1save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully. SW-1Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname SW-2 [SW-2]vlan batch 13 14 Info: This operation may take a few seconds. Please wait for a moment...done. [SW-2]interface Ethernet 0/0/1 [SW-2-Ethernet0/0/1]port link-type access [SW-2-Ethernet0/0/1]port default vlan 13 [SW-2-Ethernet0/0/1]quit [SW-2]interface Ethernet 0/0/2 [SW-2-Ethernet0/0/2]port link-type access [SW-2-Ethernet0/0/2]port default vlan 14 [SW-2-Ethernet0/0/2]quit [SW-2]interface GigabitEthernet 0/0/1 [SW-2-GigabitEthernet0/0/1]port link-type trunk [SW-2-GigabitEthernet0/0/1]port trunk allow-pass vlan 13 14 [SW-2-GigabitEthernet0/0/1]quit [SW-2]quit SW-2save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.Huaweisystem-view Jan 6 2025 12:33:29-08:00 Huawei %%01PHY/1/PHY(l)[1]: Ethernet0/0/2: change status to up Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname SW-4 [SW-4]vlan batch 17 18 Info: This operation may take a few seconds. Please wait for a moment...done. [SW-4]interface Ethernet 0/0/1 [SW-4-Ethernet0/0/1]port link-type access [SW-4-Ethernet0/0/1]port default vlan 17 [SW-4-Ethernet0/0/1]quit [SW-4]interface Ethernet 0/0/2 [SW-4-Ethernet0/0/2]port link-type access [SW-4-Ethernet0/0/2]port default vlan 18 [SW-4-Ethernet0/0/2]quit [SW-4]interface GigabitEthernet 0/0/1 [SW-4-GigabitEthernet0/0/1]port link-type trunk [SW-4-GigabitEthernet0/0/1]port trunk allow-pass vlan 17 18 [SW-4-GigabitEthernet0/0/1]quit [SW-4]quit SW-4save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully. SW-4Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname SW-3 [SW-3]vlan batch 15 16 Info: This operation may take a few seconds. Please wait for a moment...done. [SW-3]interface Ethernet 0/0/1 [SW-3-Ethernet0/0/1]port link-type access [SW-3-Ethernet0/0/1]port default vlan 15 [SW-3-Ethernet0/0/1]quit [SW-3]interface Ethernet 0/0/2 [SW-3-Ethernet0/0/2]port link-type access [SW-3-Ethernet0/0/2]port default vlan 16 [SW-3-Ethernet0/0/2]quit [SW-3]interface GigabitEthernet 0/0/1 [SW-3-GigabitEthernet0/0/1]port link-type trunk [SW-3-GigabitEthernet0/0/1]port trunk allow-pass vlan 15 16 [SW-3-GigabitEthernet0/0/1]quit [SW-3]quit SW-3save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully. SW-33、配置路由交换进行测试。 Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname RS-1 [RS-1]vlan batch 11 12 Info: This operation may take a few seconds. Please wait for a moment...done. [RS-1]interface vlanif 11 [RS-1-Vlanif11]ip address 192.168.100.254 255.255.255.0 [RS-1-Vlanif11]quit [RS-1]interface vlanif 12 [RS-1-Vlanif12]ip address 192.168.101.254 255.255.255.0 [RS-1-Vlanif12]quit [RS-1]interface GigabitEthernet 0/0/24 [RS-1-GigabitEthernet0/0/24]port link-type trunk [RS-1-GigabitEthernet0/0/24]port trunk allow-pass vlan 11 12 [RS-1-GigabitEthernet0/0/24]quit [RS-1]vlan 100 [RS-1-vlan100]quit [RS-1]interface Vlanif 100 [RS-1-Vlanif100]ip address 10.0.1.1 255.255.255.252 [RS-1-Vlanif100]quit [RS-1]interface GigabitEthernet 0/0/1 [RS-1-GigabitEthernet0/0/1]port link-type access [RS-1-GigabitEthernet0/0/1]port default vlan 100 [RS-1-GigabitEthernet0/0/1]quit [RS-1]ip route-static 0.0.0.0 0.0.0.0 10.0.1.2测试VLAN10和VLAN11可以正常通信 设置所有数据包下一跳到R-1路由器。 Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]vlan batch 13 14 Info: This operation may take a few seconds. Please wait for a moment...done. [Huawei]sysname RS-2 [RS-2]interface Vlanif 13 [RS-2-Vlanif13]ip address 192.168.102.254 255.255.255.0 [RS-2-Vlanif13]quit [RS-2]interface Vlanif 14 [RS-2-Vlanif14]ip address 192.168.103.254 255.255.255.0 [RS-2-Vlanif14]quit [RS-2]interface GigabitEthernet 0/0/24 [RS-2-GigabitEthernet0/0/24]port link-type trunk [RS-2-GigabitEthernet0/0/24]port trunk allow-pass vlan 13 14 [RS-2-GigabitEthernet0/0/24]quit [RS-2]vlan 100 [RS-2-vlan100]quit [RS-2]interface Vlanif 100 [RS-2-Vlanif100]ip address 10.0.2.1 255.255.255.252 [RS-2-Vlanif100]quit [RS-2]interface GigabitEthernet 0/0/1 [RS-2-GigabitEthernet0/0/1]port link-type access [RS-2-GigabitEthernet0/0/1]port default vlan 100 [RS-2-GigabitEthernet0/0/1]quit [RS-2]ip route-static 0.0.0.0 0.0.0.0 10.0.2.2 [RS-2]quit RS-2save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname RS-3 [RS-3]vlan batch 15 16 Info: This operation may take a few seconds. Please wait for a moment...done. [RS-3]interface Vlanif 15 [RS-3-Vlanif15]ip address 192.168.104.254 255.255.255.0 [RS-3-Vlanif15]quit [RS-3]interface Vlanif 16 [RS-3-Vlanif16]ip address 192.168.105.254 255.255.255.0 [RS-3-Vlanif16]quit [RS-3]interface GigabitEthernet 0/0/24 [RS-3-GigabitEthernet0/0/24]port link-type trunk [RS-3-GigabitEthernet0/0/24]port trunk allow-pass vlan 15 16 [RS-3-GigabitEthernet0/0/24]quit [RS-3]vlan 100 [RS-3-vlan100]quit [RS-3]interface Vlanif 100 [RS-3-Vlanif100]ip address 10.0.3.1 255.255.255.252 [RS-3-Vlanif100]quit [RS-3]interface GigabitEthernet 0/0/1 [RS-3-GigabitEthernet0/0/1]port link-type access [RS-3-GigabitEthernet0/0/1]port default vlan 100 [RS-3-GigabitEthernet0/0/1]quit [RS-3]ip route-static 0.0.0.0 0.0.0.0 10.0.3.2 [RS-3]quit RS-3save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname RS-4 [RS-4]vlan batch 17 18 Info: This operation may take a few seconds. Please wait for a moment...done. [RS-4]interface Vlanif 17 [RS-4-Vlanif17]ip address 192.168.106.254 255.255.255.0 [RS-4-Vlanif17]quit [RS-4]interface Vlanif 18 [RS-4-Vlanif18]ip address 192.168.107.254 255.255.255.0 [RS-4-Vlanif18]quit [RS-4]interface GigabitEthernet 0/0/24 [RS-4-GigabitEthernet0/0/24]port link-type trunk [RS-4-GigabitEthernet0/0/24]port trunk allow-pass vlan 17 18 [RS-4-GigabitEthernet0/0/24]quit [RS-4]vlan 100 [RS-4-vlan100]quit [RS-4]interface Vlanif 100 [RS-4-Vlanif100]ip address 10.0.4.1 255.255.255.252 [RS-4-Vlanif100]quit [RS-4]interface GigabitEthernet 0/0/1 [RS-4-GigabitEthernet0/0/1]port link-type access [RS-4-GigabitEthernet0/0/1]port default vlan 100 [RS-4-GigabitEthernet0/0/1]quit [RS-4]ip route-static 0.0.0.0 0.0.0.0 10.0.4.2 [RS-4]quit RS-4save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 0. Save the configuration successfully.这步完成后同一个交换机下的两台主机是可以互相通信的其他情况则不可以。 4、配置路由器接口和静态路由进行测试。 Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname R-1 [R-1]interface GigabitEthernet 0/0/0 [R-1-GigabitEthernet0/0/0]ip address 10.0.0.1 255.255.255.252 [R-1-GigabitEthernet0/0/0]quit [R-1]interface GigabitEthernet 0/0/1 [R-1-GigabitEthernet0/0/1]ip address 10.0.1.2 255.255.255.252 [R-1-GigabitEthernet0/0/1]quit [R-1]interface GigabitEthernet 0/0/2 [R-1-GigabitEthernet0/0/2]ip address 10.0.2.2 255.255.255.252 [R-1-GigabitEthernet0/0/2]quit [R-1]ip route-static 192.168.100.0 23 10.0.1.1 [R-1]ip route-static 192.168.102.0 23 10.0.2.1 [R-1]ip route-static 192.168.104.0 22 10.0.0.2 //注意子网掩码为22 [R-1]quit R-1save Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname R-2 [R-2]interface GigabitEthernet 0/0/0 [R-2-GigabitEthernet0/0/0]ip address 10.0.0.2 255.255.255.252 [R-2-GigabitEthernet0/0/0]quit [R-2]interface GigabitEthernet 0/0/1 [R-2-GigabitEthernet0/0/1]ip address 10.0.0.5 255.255.255.252 [R-2-GigabitEthernet0/0/1]quit [R-2]ip route-static 192.168.100.0 22 10.0.0.1 [R-2]ip route-static 192.168.104.0 22 10.0.0.6 [R-2]quit R-2save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 17. Save the configuration successfully.R-2路由比较特殊因为是作为8台主机通信的总中转站所以对静态路由的范围需要确认清楚子网掩码需要合理分配。 Huaweisystem-view Enter system view, return user view with CtrlZ. [Huawei]undo info-center enable Info: Information center is disabled. [Huawei]sysname R-3 [R-3]interface GigabitEthernet 0/0/0 [R-3-GigabitEthernet0/0/0]ip address 10.0.0.6 255.255.255.252 [R-3-GigabitEthernet0/0/0]quit [R-3]interface GigabitEthernet 0/0/1 [R-3-GigabitEthernet0/0/1]ip address 10.0.3.2 255.255.255.252 [R-3-GigabitEthernet0/0/1]quit [R-3]interface GigabitEthernet 0/0/2 [R-3-GigabitEthernet0/0/2]ip address 10.0.4.2 255.255.255.252 [R-3-GigabitEthernet0/0/2]quit [R-3]ip route-static 192.168.104.13 23 10.0.3.1 Info: The destination address and mask of the configured static route mismatched , and the static route 192.168.104.0/23 was generated. [R-3]ip route-static 192.168.104.0 23 10.0.3.1 Error: The route already exists. [R-3]undo ip route-static 192.168.104.13 23 10.0.3.1 Warning: The destination address and the mask do not match, and thus the static route 192.168.104.0/23 will be deleted. Continue?[Y/N]:y [R-3]ip route-static 192.168.104.0 23 10.0.3.1 [R-3]ip route-static 192.168.106.0 23 10.0.4.1 [R-3]ip route-static 192.168.100.0 22 10.0.0.5 [R-3]quit R-3save The current configuration will be written to the device. Are you sure to continue?[Y/N]y Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]: Now saving the current configuration to the slot 17. Save the configuration successfully.5、最后测试任意两台主机通信情况 配置没问题的情况下最终测试结果是任意两台主机都可以相互通信的。 注意 在路由器做静态路由的时候可以看到R-1到Host-3的子网掩码给的是23位目的是为了把Host-4的网段包含进去也可以单独写Host-4这时子网掩码写24位。 像R-2的路由目的地址一般是包含四个网段的主机的这时子网掩码写22位同理也可以写24位然后单独写给每一台主机。
http://www.hkea.cn/news/14408177/

相关文章:

  • 重庆建设人才网站建设一个网站的流程
  • ru如何制作网站wordpress中英文标题
  • 营销网站结构西安小程序搭建
  • 营口市住房建设保障办官方网站企业网站建设 cms
  • 廊坊建设网站智慧餐厅管理系统
  • 某网站seo诊断分析赣州企业网站建设
  • 做网站要学的知识wordpress邮件发文章
  • 哈尔滨网站关键字优化选择建设网站公司要注意什么
  • 外贸网站如何推广优化白云区pc端网站建设
  • 网站设计评级网络游戏排行榜2020
  • 做网站的公司现在还 赚钱吗wordpress安装与使用说明
  • 成都 高端网站建设网站推广的目的是什么
  • 微信公众号私自建设电影网站秦皇岛市属于哪个省份
  • 网站如何做百度实名认证宜春建设局网站
  • 用凡科做的网站怎么下载个人社保缴费基数怎么算
  • 怎么制作个人作品网站小程序商城的好处
  • 咖啡网站设计模板wordpress大前端下载
  • 广州公司网站软件开发工程师发展前景
  • 网站建设必须在服务器网站开发项目架构
  • 万网网站空间服务范围网站优化标题
  • 做的比较好旅游网站建筑企业公司
  • 兰州网站建设论坛网络服务公司名字
  • 网站获取访客qq号做带后台的网站
  • 跨境电商官方网站建设郑州网站建设联系方式
  • 网站前置或专项审批内蒙古网站建设熊掌号
  • 网站建设开发服务费记账莱芜又出大事
  • 谷歌绘制的网站网页设计基础ppt
  • 盐城做百度网站电商门户网站
  • 网站开发公司网站官网吉安建设公司网站
  • 网站服务器崩了怎么办打开这个网站