网站建设文档,搜索引擎优化策略应该包括,门户网站建设为企业带来的好处,做微网站公司TMDSEVM6657LS评估板恢复出厂默认状态
前言
TMDSEVM6657LS评估板特别适用于DSP开发的初学者#xff0c;但有时候拿到手的开发板几经流转#xff0c;被别人修改过#xff0c;也可能自己烧录过程出错#xff0c;导致开发板的状态未知等原因#xff0c;需要恢复到出厂默认状…TMDSEVM6657LS评估板恢复出厂默认状态
前言
TMDSEVM6657LS评估板特别适用于DSP开发的初学者但有时候拿到手的开发板几经流转被别人修改过也可能自己烧录过程出错导致开发板的状态未知等原因需要恢复到出厂默认状态本文主要介绍如何利用官方提供的工具将开发板恢复到出厂默认状态。
在开始前需要安装CCS工具默认安装完成后会在安装目录生成两个文件夹C:\ti\ccsv5\ccs_base\scripting\bin和C:\ti\mcsdk_2_01_01_04\tools\program_evm不同版本的CCS可能导致mcsdk的版本号不同以自己安装的目录为准。如果没有program_evm文件夹可以使用购买时厂家提供的光盘里的program_evm文件夹里程序。
操作步骤
安装CCS 我这里安装的是CCS5.5步骤略。 安装完CCS后生成的两个文件夹 硬件准备 1将12v DC电源适配器于评估板的电源接口相连 2将评估板上自带的XDS200仿真器通过USB连接线与电脑相连确保J4 J5 均处于开路状态 3将评估板上COM_SEL1跳线中的3-5针相连4-6针相连选择使用三针串口并用评估板自带的串口连接线连接至电脑的串口。如果选择使用板上的USB-uart需要将COM_SEL1跳线中的1-3针相连2-4针相连 4将16个BOOT拨码开关调整到如下状态 最终实物图如下所示 恢复出厂默认配置步骤 恢复出厂默认配置主要是将重新烧录评估板中EEPROM、NOR FLASH和NAND FLASH中的镜像。 1设置环境变量 评估板上电后打开cmd命令窗口设置两个环境变量
set DSS_SCRIPT_DIRC:\ti\ccsv5\ccs_base\scripting\binset PROGRAM_EVM_TARGET_CONFIG_FILEC:\ti\mcsdk_2_01_01_04\tools\program_evm\configs\evm6657l\evm6657ls.ccxml2运行DSS脚本
%DSS_SCRIPT_DIR%\dss.bat program_evm.js tmdsevm6657ls-le运行后输出以下信息 由于program_evm\binaries\evm6657l文件夹中没有nand.bin镜像文件所以会提示nand Flash烧录失败eeprom和NOR都烧录成功了。
C:\ti\mcsdk_2_01_01_04\tools\program_evm%DSS_SCRIPT_DIR%\dss.bat program_evm.js
Syntax error in command line
Syntax: program_evm.js [tmdx|tmds]evm[c](device)l[x][e][-le|-be] [images_to_write]tmdx: TMDX type EVMtmds: TMDS type EVMc: Not used, for backward compatibilitydevice is the board name e.g 6472,6678 etcl: Low cost EVMx: EVM supports encryptione: EVM uses 560 Mezzanine Emulator daughter cardle: Little Endianbe: Big Endianexample: TMDXEVM6678L-le[images_to_write] OPTIONAL is a list of the images to be writtenexample: eeprom50,norIf not specified all (eeprom50,eeprom51,nand,nor) will be writtenC:\ti\mcsdk_2_01_01_04\tools\program_evm%DSS_SCRIPT_DIR%\dss.bat program_evm.js tmdsevm6657ls-le
board: evm6657l
endian: Little
emulation: XDS200 emulator
binaries: C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/
ccxml: C:\ti\mcsdk_2_01_01_04\tools\program_evm\configs\evm6657l\evm6657ls.ccxml
C66xx_0: GEL Output:
Connecting Target...C66xx_0: GEL Output: DSP core #0C66xx_0: GEL Output: C6657L GEL file Ver is 1.003C66xx_0: GEL Output: Global Default Setup...C66xx_0: GEL Output: Setup Cache...C66xx_0: GEL Output: L1P 32KC66xx_0: GEL Output: L1D 32KC66xx_0: GEL Output: L2 ALL SRAMC66xx_0: GEL Output: Setup Cache... Done.C66xx_0: GEL Output: Main PLL (PLL1) Setup ...C66xx_0: GEL Output: PLL in Bypass ...C66xx_0: GEL Output: PLL1 Setup for DSP 1000.0 MHz.C66xx_0: GEL Output: SYSCLK2 333.3333 MHz, SYSCLK5 200.0 MHz.C66xx_0: GEL Output: SYSCLK8 15.625 MHz.C66xx_0: GEL Output: PLL1 Setup... Done.C66xx_0: GEL Output: Power on all PSC modules and DSP domains...C66xx_0: GEL Output: Set_PSC_State... Timeout Error #03 pd12, md4!C66xx_0: GEL Output: Power on all PSC modules and DSP domains... Done.C66xx_0: GEL Output: DDR3 PLL (PLL2) Setup ...C66xx_0: GEL Output: DDR3 PLL Setup... Done.C66xx_0: GEL Output: DDR3 Init begin (1333 auto)C66xx_0: GEL Output: XMC Setup ... DoneC66xx_0: GEL Output:
DDR3 initialization is complete.C66xx_0: GEL Output: DDR3 Init doneC66xx_0: GEL Output: DDR3 memory test... StartedC66xx_0: GEL Output: DDR3 memory test... PassedC66xx_0: GEL Output: PLL and DDR3 Initialization completed(0) ...C66xx_0: GEL Output: configSGMIISerdes Setup... BeginC66xx_0: GEL Output: SGMII SERDES has been configured.C66xx_0: GEL Output: Enabling EDC ...C66xx_0: GEL Output: L1P error detection logic is enabled.C66xx_0: GEL Output: L2 error detection/correction logic is enabled.C66xx_0: GEL Output: MSMC error detection/correction logic is enabled.C66xx_0: GEL Output: Enabling EDC ...DoneC66xx_0: GEL Output: Global Default Setup... Done.Start writing eeprom50
Writer:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/eepromwriter_evm6657l.outImage:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/eeprom50.binC66xx_0: GEL Output: Invalidate All Cache...C66xx_0: GEL Output: Invalidate All Cache... Done.C66xx_0: GEL Output: GEL Reset...C66xx_0: GEL Output: GEL Reset... Done.C66xx_0: GEL Output: Disable all EDMA3 interrupts and events.EEPROM Writer Utility Version 01.00.00.05Writing 59356 bytes from DSP memory address 0x0c000000 to EEPROM bus address 0x0050 starting from device address 0x0000 ...
Reading 59356 bytes from EEPROM bus address 0x0050 to DSP memory address 0x0c010000 starting from device address 0x0000 ...
Verifying data read ...
EEPROM programming completed successfully
Start writing eeprom51
Writer:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/eepromwriter_evm6657l.outImage:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/eeprom51.binC66xx_0: GEL Output: Invalidate All Cache...C66xx_0: GEL Output: Invalidate All Cache... Done.C66xx_0: GEL Output: GEL Reset...C66xx_0: GEL Output: GEL Reset... Done.C66xx_0: GEL Output: Disable all EDMA3 interrupts and events.EEPROM Writer Utility Version 01.00.00.05Writing 47848 bytes from DSP memory address 0x0c000000 to EEPROM bus address 0x0051 starting from device address 0x0000 ...
Reading 47848 bytes from EEPROM bus address 0x0051 to DSP memory address 0x0c010000 starting from device address 0x0000 ...
Verifying data read ...
EEPROM programming completed successfully
Writer:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/nandwriter_evm6657l.outNAND:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/nand.binRequired NAND files does not exist in C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/Writer:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/norwriter_evm6657l.outNOR:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/nor.binC66xx_0: GEL Output: Invalidate All Cache...C66xx_0: GEL Output: Invalidate All Cache... Done.C66xx_0: GEL Output: GEL Reset...C66xx_0: GEL Output: GEL Reset... Done.C66xx_0: GEL Output: Disable all EDMA3 interrupts and events.Start loading nor.bin
Start programming NOR
2023_02_8_151707
NOR Writer Utility Version 01.00.00.03Flashing sector 0 (0 bytes of 663723)
Flashing sector 1 (65536 bytes of 663723)
Flashing sector 2 (131072 bytes of 663723)
Flashing sector 3 (196608 bytes of 663723)
Flashing sector 4 (262144 bytes of 663723)
Flashing sector 5 (327680 bytes of 663723)
Flashing sector 6 (393216 bytes of 663723)
Flashing sector 7 (458752 bytes of 663723)
Flashing sector 8 (524288 bytes of 663723)
Flashing sector 9 (589824 bytes of 663723)
Flashing sector 10 (655360 bytes of 663723)
Reading and verifying sector 0 (0 bytes of 663723)
Reading and verifying sector 1 (65536 bytes of 663723)
Reading and verifying sector 2 (131072 bytes of 663723)
Reading and verifying sector 3 (196608 bytes of 663723)
Reading and verifying sector 4 (262144 bytes of 663723)
Reading and verifying sector 5 (327680 bytes of 663723)
Reading and verifying sector 6 (393216 bytes of 663723)
Reading and verifying sector 7 (458752 bytes of 663723)
Reading and verifying sector 8 (524288 bytes of 663723)
Reading and verifying sector 9 (589824 bytes of 663723)
Reading and verifying sector 10 (655360 bytes of 663723)
NOR programming completed successfully
End programming NOR
终止批处理操作吗(Y/N)? yC:\ti\mcsdk_2_01_01_04\tools\program_evmset DSS_SCRIPT_DIRC:\ti\ccsv5\ccs_base\scripting\binC:\ti\mcsdk_2_01_01_04\tools\program_evmset PROGRAM_EVM_TARGET_CONFIG_FILEC:\ti\mcsdk_2_01_01_04\tools\program_evm\configs\evm6657l\evm6657ls.ccxmlC:\ti\mcsdk_2_01_01_04\tools\program_evm%DSS_SCRIPT_DIR%\dss.bat program_evm.js tmdsevm6657ls-le
board: evm6657l
endian: Little
emulation: XDS200 emulator
binaries: C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/
ccxml: C:\ti\mcsdk_2_01_01_04\tools\program_evm\configs\evm6657l\evm6657ls.ccxml
C66xx_0: GEL Output:
Connecting Target...C66xx_0: GEL Output: DSP core #0C66xx_0: GEL Output: C6657L GEL file Ver is 1.003C66xx_0: GEL Output: Global Default Setup...C66xx_0: GEL Output: Setup Cache...C66xx_0: GEL Output: L1P 32KC66xx_0: GEL Output: L1D 32KC66xx_0: GEL Output: L2 ALL SRAMC66xx_0: GEL Output: Setup Cache... Done.C66xx_0: GEL Output: Main PLL (PLL1) Setup ...C66xx_0: GEL Output: PLL not in Bypass, Enable BYPASS in the PLL Controller...C66xx_0: GEL Output: PLL1 Setup for DSP 1000.0 MHz.C66xx_0: GEL Output: SYSCLK2 333.3333 MHz, SYSCLK5 200.0 MHz.C66xx_0: GEL Output: SYSCLK8 15.625 MHz.C66xx_0: GEL Output: PLL1 Setup... Done.C66xx_0: GEL Output: Power on all PSC modules and DSP domains...C66xx_0: GEL Output: Power on all PSC modules and DSP domains... Done.C66xx_0: GEL Output: DDR3 PLL (PLL2) Setup ...C66xx_0: GEL Output: DDR3 PLL Setup... Done.C66xx_0: GEL Output: DDR3 Init begin (1333 auto)C66xx_0: GEL Output: XMC Setup ... DoneC66xx_0: GEL Output:
DDR3 initialization is complete.C66xx_0: GEL Output: DDR3 Init doneC66xx_0: GEL Output: DDR3 memory test... StartedC66xx_0: GEL Output: DDR3 memory test... PassedC66xx_0: GEL Output: PLL and DDR3 Initialization completed(0) ...C66xx_0: GEL Output: configSGMIISerdes Setup... BeginC66xx_0: GEL Output: SGMII SERDES has been configured.C66xx_0: GEL Output: Enabling EDC ...C66xx_0: GEL Output: L1P error detection logic is enabled.C66xx_0: GEL Output: L2 error detection/correction logic is enabled.C66xx_0: GEL Output: MSMC error detection/correction logic is enabled.C66xx_0: GEL Output: Enabling EDC ...DoneC66xx_0: GEL Output: Global Default Setup... Done.Start writing eeprom50
Writer:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/eepromwriter_evm6657l.outImage:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/eeprom50.binC66xx_0: GEL Output: Invalidate All Cache...C66xx_0: GEL Output: Invalidate All Cache... Done.C66xx_0: GEL Output: GEL Reset...C66xx_0: GEL Output: GEL Reset... Done.C66xx_0: GEL Output: Disable all EDMA3 interrupts and events.EEPROM Writer Utility Version 01.00.00.05Writing 59356 bytes from DSP memory address 0x0c000000 to EEPROM bus address 0x0050 starting from device address 0x0000 ...
Reading 59356 bytes from EEPROM bus address 0x0050 to DSP memory address 0x0c010000 starting from device address 0x0000 ...
Verifying data read ...
EEPROM programming completed successfully
Start writing eeprom51
Writer:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/eepromwriter_evm6657l.outImage:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/eeprom51.binC66xx_0: GEL Output: Invalidate All Cache...C66xx_0: GEL Output: Invalidate All Cache... Done.C66xx_0: GEL Output: GEL Reset...C66xx_0: GEL Output: GEL Reset... Done.C66xx_0: GEL Output: Disable all EDMA3 interrupts and events.EEPROM Writer Utility Version 01.00.00.05Writing 47848 bytes from DSP memory address 0x0c000000 to EEPROM bus address 0x0051 starting from device address 0x0000 ...
Reading 47848 bytes from EEPROM bus address 0x0051 to DSP memory address 0x0c010000 starting from device address 0x0000 ...
Verifying data read ...
EEPROM programming completed successfully
Writer:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/nandwriter_evm6657l.outNAND:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/nand.binRequired NAND files does not exist in C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/Writer:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/norwriter_evm6657l.outNOR:C:\ti\mcsdk_2_01_01_04\tools\program_evm/binaries/evm6657l/nor.binC66xx_0: GEL Output: Invalidate All Cache...C66xx_0: GEL Output: Invalidate All Cache... Done.C66xx_0: GEL Output: GEL Reset...C66xx_0: GEL Output: GEL Reset... Done.C66xx_0: GEL Output: Disable all EDMA3 interrupts and events.Start loading nor.bin
Start programming NOR
2023_02_8_164346
NOR Writer Utility Version 01.00.00.03Flashing sector 0 (0 bytes of 663723)
Flashing sector 1 (65536 bytes of 663723)
Flashing sector 2 (131072 bytes of 663723)
Flashing sector 3 (196608 bytes of 663723)
Flashing sector 4 (262144 bytes of 663723)
Flashing sector 5 (327680 bytes of 663723)
Flashing sector 6 (393216 bytes of 663723)
Flashing sector 7 (458752 bytes of 663723)
Flashing sector 8 (524288 bytes of 663723)
Flashing sector 9 (589824 bytes of 663723)
Flashing sector 10 (655360 bytes of 663723)
Reading and verifying sector 0 (0 bytes of 663723)
Reading and verifying sector 1 (65536 bytes of 663723)
Reading and verifying sector 2 (131072 bytes of 663723)
Reading and verifying sector 3 (196608 bytes of 663723)
Reading and verifying sector 4 (262144 bytes of 663723)
Reading and verifying sector 5 (327680 bytes of 663723)
Reading and verifying sector 6 (393216 bytes of 663723)
Reading and verifying sector 7 (458752 bytes of 663723)
Reading and verifying sector 8 (524288 bytes of 663723)
Reading and verifying sector 9 (589824 bytes of 663723)
Reading and verifying sector 10 (655360 bytes of 663723)
NOR programming completed successfully
End programming NOR3验证 断电后将BOOT拨码开关拨到如下状态 将评估板的串口连接好串口工具重新上电后会输出以下信息证明镜像烧录成功
TMDXEVM6657L POST Version 01.00.00.06
------------------------------------------
SOC InformationFPGA Version: 0010
Board Serial Number: ti
EFUSE MAC ID is: 00 18 30 0A 01 CF
PLL Reset Type Status Register: 0x00000001
Platform init return code: 0x00000000
Additional Information: (0x02350014) :0AEB0000 (0x02350624) :000211FF (0x02350678) :00123400 (0x0235063C) :000801FF (0x02350640) :000801FF (0x02350644) :000900DB (0x02350648) :000A40DB (0x0235064C) :000B10DB (0x02350650) :000C00DB (0x02350654) :000C00DB (0x02350658) :000C00DB (0x0235065C) :000D1800 (0x02350660) :000E1800 (0x02350668) :000F1800 (0x02350670) :00101800 (0x02620008) :0B009006 (0x0262000c) :040101A7 (0x02620010) :00000000 (0x02620014) :76780000 (0x02620018) :0B97A02F (0x02620180) :0602B000
------------------------------------------Power On Self TestPOST running in progress ...
POST I2C EEPROM read test started!
POST I2C EEPROM read test passed!
POST SPI NOR read test started!
POST SPI NOR read test passed!
POST EMIF16 NAND read test started!
POST EMIF16 NAND read test passed!
POST EMAC loopback test started!
POST EMAC loopback test passed!
POST external memory test started!
POST external memory test passed!
POST done successfully!POST result: PASS等显示出“POST result: PASS”后通过串口助手发送ti(小写即可设置自己的序列号等待时间间隔久了貌似久不响应了
Please enter the 10 digit serial number for this board, and then press ENTER key:12502120Serial number programmed to EEPROM successfully!将拨码开关设置为如下状态将网口与电脑的网口相连验证NOR FLSH功能: 串口输出如下信息
IBL version: 1.0.0.15
IBL: Booting from NOR
platform_init Done
Start BIOS 6
HUA version 2.00.00.04
Setting hostname to tidemo-502120
MAC Address: 00-18-30-0A-01-CF
Configuring DHCP client
Service Status: DHCPC : Enabled : : 000
Service Status: THTTP : Enabled : : 000
Service Status: DHCPC : Enabled : Running : 000完成
