网站标题的选择,免费logo设计一键生成下载,如何查看网站收录情况,小程序商城系统平台20250213刷机飞凌的OK3588-C_Linux5.10.209Qt5.15.10_用户资料_R1 2025/2/13 15:10 缘起#xff1a;OK3588-C_Linux5.10.66Qt5.15.2的R5都出来了。但是公司一直在R4上面开发的#xff0c;不想动了。 不过我的原则#xff0c;只要是有新的系统SDK/BSP放出来#xff0c;都先在…20250213刷机飞凌的OK3588-C_Linux5.10.209Qt5.15.10_用户资料_R1 2025/2/13 15:10 缘起OK3588-C_Linux5.10.66Qt5.15.2的R5都出来了。但是公司一直在R4上面开发的不想动了。 不过我的原则只要是有新的系统SDK/BSP放出来都先在底层/驱动层适配好以免临时突然找我去搞。 看R1的UI界面美观/清爽多了。 以前的灰蓝色现在改成亮蓝色了 \\192.168.3.250\rootroot\media\rootroot\14TB581\BaiduNetdiskDownload\20240506的OK3588-C开发板\OK3588-C_Linux5.10.66Qt5.15.2_用户资料_R4(更新日期_20240321) \\192.168.3.250\rootroot\media\rootroot\14TB581\BaiduNetdiskDownload\20240506的OK3588-C开发板\OK3588-C_Linux5.10.66Qt5.15.2_用户资料_R5(更新日期_20241012) \\192.168.3.250\rootroot\media\rootroot\14TB581\BaiduNetdiskDownload\20240506的OK3588-C开发板\OK3588-C_Linux5.10.209Qt5.15.10_用户资料_R1
产品使用手册 资料版本 下载链接 / 更新记录 在线阅览链接: https://forlinx-book.yuque.com/rh74yu/ok3588?# 《OK3588》 使用手册类型 软件用户使用手册、用户编译手册、常见问题手册、硬件手册、硬件设计指南、应用笔记。 https://forlinx-book.yuque.com/rh74yu/ok3588?# 《OK3588》 https://forlinx-book.yuque.com/rh74yu/ok3588/a9ea62aa32b678cc86795b8bd0c99063 Linux5.10.209 Qt5.15.10_用户编译手册
https://forlinx-book.yuque.com/rh74yu/ok3588/222ba44503ce82cf7c61ec969d1ae8fc 04_相关代码编译 Linux系统是飞凌在buildroot的基础上构建的桌面操作系统。 本章节主要描述开发板相关源码的编译方法包括内核源码编译、应用程序编译方法。
4.2.1 全编译测试 在源码路径内提供了编译脚本build.sh运行该脚本对整个源码进行编译需要在终端切换到解压出来的源码路径找到build.sh文件。 forlinxubuntu:~$ cd /home/forlinx/3588/OK3588-linux-source 以下操作需要在源码目录下操作全编译方法 进行全编译 forlinxubuntu: ~/3588/OK3588-linux-source$ ./build.sh
编译成功后使系统镜像将在rockdev文件夹下生成如下图
?? 注意update.img为打包好用于OTG或者TF卡完全烧写用其它文件为分步烧写使用 编译生成的固件位置 Z:\version\R1_OK3588-linux-source_Linux5.10.209\output\update\Image\update.img 刷机LOG
[BEGIN] 2025/2/13 15:07:03 rootok3588-buildroot:/# DDR 3488111f83 cym 24/04/12-12:49:26,fwver: v1.17 LPDDR4X, 2112MHz channel[0] BW16 Col10 Bk8 CS0 Row16 CS1 Row16 CS2 Die BW16 Size2048MB channel[1] BW16 Col10 Bk8 CS0 Row16 CS1 Row16 CS2 Die BW16 Size2048MB channel[2] BW16 Col10 Bk8 CS0 Row16 CS1 Row16 CS2 Die BW16 Size2048MB channel[3] BW16 Col10 Bk8 CS0 Row16 CS1 Row16 CS2 Die BW16 Size2048MB Manufacturer ID:0x6 CH0 RX Vref:26.3%, TX Vref:19.8%,19.8%DQ rds: h1 l0, h0 l0, h1 l0, h1 l0, h0 l0, h0 l0, h0 l1, h0 l1, h0 l0, h6 l0, h1 l0, h0 l0, h0 l0, h0 l1, h0 l0, h6 l0,
CH1 RX Vref:28.9%, TX Vref:20.8%,20.8%DQ rds: h4 l0, h3 l0, h2 l0, h1 l0, h1 l0, h1 l0, h3 l0, h2 l0, h1 l0, h1 l0, h3 l0, h1 l0, h2 l0, h3 l0, h3 l0, h2 l0,
CH2 RX Vref:29.7%, TX Vref:18.8%,19.8%DQ rds: h1 l0, h0 l0, h4 l0, h2 l0, h1 l0, h3 l0, h1 l0, h1 l0, h1 l0, h1 l0, h3 l0, h4 l0, h1 l0, h1 l0, h4 l0, h2 l0,
CH3 RX Vref:28.9%, TX Vref:20.8%,20.8%DQ rds: h3 l0, h1 l0, h2 l0, h1 l0, h5 l0, h1 l0, h1 l0, h3 l0, h0 l0, h4 l0, h4 l0, h3 l0, h2 l0, h6 l0, h7 l0, h2 l0,
stride0x2, ddr_config0x4 hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x401000 change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-ge4e124926e-230922 #lxh (Sep 25 2023 - 10:58:38), fwver: v1.13 unknown raw ID 0 0 0 unrecognized JEDEC id bytes: 00, 00, 00 Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 2 spl: mmc init failed with error: -123 Trying to boot from MMC1 SPL: A/B-slot: _a, successful: 0, tries-remain: 7 Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(64122e141b...) OK ## Checking uboot 0x00200000 ... sha256(82f9789c12...) OK ## Checking fdt 0x0033e870 ... sha256(5b705577eb...) OK ## Checking atf-2 0xff100000 ... sha256(ce8968e34f...) OK ## Checking atf-3 0x000f0000 ... sha256(ce48b69fdd...) OK ## Checking optee 0x08400000 ... sha256(b866e4e4a1...) OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 142.47/448.863 ms
INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-765-g588059758:derrick.huang, fwver: v1.46 NOTICE: BL31: Built : 18:13:16, Apr 29 2024 INFO: spec: 0x1 INFO: code: 0x88 INFO: ext 32k is not valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk0xff bcore0_rst 0x0, bcore1_rst 0x0 INFO: l3 cache partition cfg-0 INFO: system boots from cpu-hwid-0 INFO: disable memory repair INFO: idle_st0x21fff, pd_st0x11fff9, repair_st0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz 528MHz INFO: dfs DDR fsp_params[2].freq_mhz 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 I/TC: I/TC: OP-TEE version: 3.13.0-791-g185dc3c92 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Tue Apr 16 11:16:18 CST 2024 aarch64, fwver: v1.16 I/TC: OP-TEE memory: TEEOS 0x200000 TA 0xc00000 SHM 0x200000 I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address 0x200000 INFO: SPSR 0x3c9 U-Boot 2017.09 (Nov 07 2024 - 16:57:28 0800)
Model: Forlinx OK3588-C Board MPIDR: 0x0 PreSerial: 2, raw, 0xfeb50000 DRAM: 8 GiB Sysmem: init Relocation Offset: eda1f000 Relocation fdt: eb9fa550 - eb9fece0 CR: M/C/I optee api revision: 2.0 mmcfe2c0000: 1, mmcfe2e0000: 0 Bootdev(atags): mmc 0 MMC0: HS400 Enhanced Strobe, 200Mhz PartType: EFI TEEC: Waring: Could not find security partition DM: v2 boot mode: None RESC: boot, blk0x00018973 resource: sha256 FIT: no signed, no conf required DTB: rk-kernel.dtb HASH(c): OK usb dr_mode not found usb dr_mode not found usb dr_mode not found I2c0 speed: 100000Hz vsel-gpios- not found! en-gpios- not found! vdd_cpu_big0_s0 800000 uV vsel-gpios- not found! en-gpios- not found! vdd_cpu_big1_s0 800000 uV I2c1 speed: 400000Hz vsel-gpios- not found! en-gpios- not found! vdd_npu_s0 800000 uV Device gpiofd8a0000: seq 0 is in use by gpiofd8a0000 Device gpiofec20000: seq 1 is in use by gpiofd8a0000 Device gpiofec40000: seq 3 is in use by gpiofec20000 Auth Success! normal mode Writing to mmc(0)... done found not node:/i2cfeaa0000/fusb30222/connector/altmodes found not node:/i2cfead0000/fusb30222/connector/altmodes get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts Device gpiofec50000: seq 4 is in use by gpiofec40000 Could not find baseparameter partition Model: Forlinx OK3588 Board spi2: RK806: 2 ON0x40, OFF0x00 download key pressed... entering download mode... RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x733c000 \usb device is high-speed \DDR 3488111f83 cym 24/04/12-12:49:26,fwver: v1.17 LPDDR4X, 2112MHz channel[0] BW16 Col10 Bk8 CS0 Row16 CS1 Row16 CS2 Die BW16 Size2048MB channel[1] BW16 Col10 Bk8 CS0 Row16 CS1 Row16 CS2 Die BW16 Size2048MB channel[2] BW16 Col10 Bk8 CS0 Row16 CS1 Row16 CS2 Die BW16 Size2048MB channel[3] BW16 Col10 Bk8 CS0 Row16 CS1 Row16 CS2 Die BW16 Size2048MB Manufacturer ID:0x6 CH0 RX Vref:26.7%, TX Vref:19.8%,19.8%DQ rds: h1 l0, h0 l0, h2 l0, h1 l0, h0 l0, h0 l0, h0 l0, h0 l0, h1 l0, h7 l0, h1 l0, h0 l0, h0 l0, h0 l0, h0 l0, h7 l0,
CH1 RX Vref:28.9%, TX Vref:20.8%,20.8%DQ rds: h3 l0, h2 l0, h1 l0, h1 l0, h1 l0, h1 l0, h2 l0, h2 l0, h2 l0, h1 l0, h3 l0, h1 l0, h2 l0, h2 l0, h3 l0, h1 l0,
CH2 RX Vref:29.7%, TX Vref:18.8%,19.8%DQ rds: h1 l0, h0 l0, h3 l0, h2 l0, h1 l0, h3 l0, h1 l0, h1 l0, h1 l0, h1 l0, h3 l0, h4 l0, h1 l0, h0 l0, h6 l0, h2 l0,
CH3 RX Vref:28.9%, TX Vref:21.8%,21.8%DQ rds: h2 l0, h1 l0, h2 l0, h1 l0, h6 l0, h1 l0, h1 l0, h3 l0, h0 l0, h4 l0, h4 l0, h3 l0, h1 l0, h3 l0, h7 l0, h3 l0,
stride0x2, ddr_config0x4 hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x401000 change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-ge4e124926e-230922 #lxh (Sep 25 2023 - 10:58:38), fwver: v1.13 unknown raw ID 0 0 0 unrecognized JEDEC id bytes: 00, 00, 00 Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 2 spl: mmc init failed with error: -123 Trying to boot from MMC1 Magic is incorrect. Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk. SPL: A/B-slot: _a, successful: 0, tries-remain: 7 Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(64122e141b...) OK ## Checking uboot 0x00200000 ... sha256(82f9789c12...) OK ## Checking fdt 0x0033e870 ... sha256(5b705577eb...) OK ## Checking atf-2 0xff100000 ... sha256(ce8968e34f...) OK ## Checking atf-3 0x000f0000 ... sha256(ce48b69fdd...) OK ## Checking optee 0x08400000 ... sha256(b866e4e4a1...) OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 151.73/458.457 ms
INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-765-g588059758:derrick.huang, fwver: v1.46 NOTICE: BL31: Built : 18:13:16, Apr 29 2024 INFO: spec: 0x1 INFO: code: 0x88 INFO: ext 32k is not valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk0xff bcore0_rst 0x0, bcore1_rst 0x0 INFO: l3 cache partition cfg-0 INFO: system boots from cpu-hwid-0 INFO: disable memory repair INFO: idle_st0x21fff, pd_st0x11fff9, repair_st0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz 528MHz INFO: dfs DDR fsp_params[2].freq_mhz 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 I/TC: I/TC: OP-TEE version: 3.13.0-791-g185dc3c92 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Tue Apr 16 11:16:18 CST 2024 aarch64, fwver: v1.16 I/TC: OP-TEE memory: TEEOS 0x200000 TA 0xc00000 SHM 0x200000 I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address 0x200000 INFO: SPSR 0x3c9 U-Boot 2017.09 (Nov 07 2024 - 16:57:28 0800)
Model: Forlinx OK3588-C Board MPIDR: 0x0 PreSerial: 2, raw, 0xfeb50000 DRAM: 8 GiB Sysmem: init Relocation Offset: eda1f000 Relocation fdt: eb9fa550 - eb9fece0 CR: M/C/I optee api revision: 2.0 mmcfe2c0000: 1, mmcfe2e0000: 0 Bootdev(atags): mmc 0 MMC0: HS400 Enhanced Strobe, 200Mhz PartType: EFI TEEC: Waring: Could not find security partition DM: v2 boot mode: normal RESC: boot, blk0x00018973 resource: sha256 FIT: no signed, no conf required DTB: rk-kernel.dtb HASH(c): OK usb dr_mode not found usb dr_mode not found usb dr_mode not found I2c0 speed: 100000Hz vsel-gpios- not found! en-gpios- not found! vdd_cpu_big0_s0 800000 uV vsel-gpios- not found! en-gpios- not found! vdd_cpu_big1_s0 800000 uV I2c1 speed: 400000Hz vsel-gpios- not found! en-gpios- not found! vdd_npu_s0 800000 uV Device gpiofd8a0000: seq 0 is in use by gpiofd8a0000 Device gpiofec20000: seq 1 is in use by gpiofd8a0000 Device gpiofec40000: seq 3 is in use by gpiofec20000 Auth Success! normal mode *** Warning - bad CRC, using default environment
Writing to mmc(0)... done found not node:/i2cfeaa0000/fusb30222/connector/altmodes found not node:/i2cfead0000/fusb30222/connector/altmodes get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts Device gpiofec50000: seq 4 is in use by gpiofec40000 Could not find baseparameter partition Model: Forlinx OK3588 Board spi2: RK806: 2 ON0x40, OFF0x00 No resource file: failed to display uboot logo No resource file: failed to display uboot logo No resource file: failed to display uboot logo Rockchip UBOOT DRM driver version: v1.0.1 vp0 have layer nr:2[0 2 ], primary plane: 2 vp1 have layer nr:2[1 3 ], primary plane: 3 vp2 have layer nr:2[6 8 ], primary plane: 8 vp3 have layer nr:2[7 9 ], primary plane: 9 dpfde60000 disconnected CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) b0pll 24000 KHz b1pll 24000 KHz lpll 24000 KHz v0pll 24000 KHz aupll 786431 KHz cpll 1500000 KHz gpll 1188000 KHz npll 850000 KHz ppll 1100000 KHz aclk_center_root 702000 KHz pclk_center_root 100000 KHz hclk_center_root 396000 KHz aclk_center_low_root 500000 KHz aclk_top_root 750000 KHz pclk_top_root 100000 KHz aclk_low_top_root 396000 KHz Net: eth1: ethernetfe1c0000 Writing to mmc(0)... done Hit key to stop autoboot(Spacebar): 0 ANDROID: reboot reason: (none) No valid android hdr Android image load failed Android boot failed, error -1. ## Booting FIT Image at 0xe96caf40 with size 0x0212e600 Fdt Ramdisk skip relocation ## Loading kernel from FIT Image at e96caf40 ... Using conf configuration ## Verified-boot: 0 Trying kernel kernel subimage Description: unavailable Type: Kernel Image Compression: uncompressed Data Start: 0xe96f8b40 Data Size: 34605568 Bytes 33 MiB Architecture: AArch64 OS: Linux Load Address: 0x00400000 Entry Point: 0x00400000 Hash algo: sha256 Hash value: bf699b2f112d604d3503c4d28de7edf37e310e5e5e276984af9981c42112fcef Verifying Hash Integrity ... sha256 OK ## Loading fdt from FIT Image at e96caf40 ... Using conf configuration Trying fdt fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0xe96cb740 Data Size: 185048 Bytes 180.7 KiB Architecture: AArch64 Load Address: 0x08300000 Hash algo: sha256 Hash value: c00b419a1ef159444d5c185fded4fec67ab59cd98e07194ea7a00098e3b59f2a Verifying Hash Integrity ... sha256 OK Loading fdt from 0x08300000 to 0x08300000 Booting using the fdt blob at 0x08300000 Loading Kernel Image from 0xe96f8b40 to 0x00400000 ... OK kernel loaded at 0x00400000, end 0x02500a00 Using Device Tree in place at 0000000008300000, end 00000000083302d7 No resource file: VP2 fail to load kernel logo No resource file: VP3 fail to load kernel logo No resource file: VP0 fail to load kernel logo ## reserved-memory: dma-trans3c000000: addr3c000000 size4000000 cma: addr10000000 size10000000 drm-logo00000000: addredf00000 sizeec000 Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000) Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000) Adding bank: 0x2f0000000 - 0x300000000 (size: 0x10000000) Total: 1512.654/2185.16 ms
Starting kernel ...
I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot Start mounting all internal partitions in /etc/fstab Log saved to /var/log/mount-all.log Note: Will skip fsck, remove /.skip_fsck to enable [0]: Handling /dev/mmcblk0p6 / ext4 rw,noauto 1 [1]: Handling /dev/mmcblk0p7 /oem ext4 defaults 2 [2]: Handling /dev/mmcblk0p8 /userdata ext4 defaults 2 [1]: Resizing /dev/mmcblk0p7(ext4) [0]: Resizing /dev/mmcblk0p6(ext4) [2]: Resizing /dev/mmcblk0p8(ext4) resize2fs 1.46.5 (30-Dec-2021) resize2fs 1.46.5 (30-Dec-2021) resize2fs 1.46.5 (30-Dec-2021) Filesystem at /dev/mmcblk0p7 is mounted on /oem; on-line resizing required old_desc_blocks 1, new_desc_blocks 1 The filesystem on /dev/mmcblk0p7 is now 32768 (4k) blocks long.
Filesystem at /dev/mmcblk0p6 is mounted on /; on-line resizing required old_desc_blocks 1, new_desc_blocks 1 The filesystem on /dev/mmcblk0p6 is now 3670016 (4k) blocks long.
Filesystem at /dev/mmcblk0p8 is mounted on /userdata; on-line resizing required old_desc_blocks 1, new_desc_blocks 6 The filesystem on /dev/mmcblk0p8 is now 11339768 (4k) blocks long.
Starting syslogd: OK log-guardian: [WARN] Not a dir: /var/log/,/tmp/ Starting klogd: log-guardian: Guarding logs in: /var/log/,/tmp/... OK Running sysctl: OK Populating /dev using udev: done Starting irqbalance: OK Saving random seed: OK Starting system message bus: done Starting iptables: OK Starting bluetoothd: OK Starting network: Failed to detect Wi-Fi/BT chip! OK Starting chrony: OK alsa-lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 alsa-lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: rockchip_dp1 Hardware is initialized using a generic method alsa-lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:1 use case configuration -2 alsa-lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:1 use case configuration -2 Found hardware: rockchip_hdmiin Hardware is initialized using a generic method alsa-lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:2 use case configuration -2 alsa-lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:2 use case configuration -2 Found hardware: rockchip-hdmi0 Hardware is initialized using a generic method starting weston... done. Starting dropbear sshd: OK Starting lighttpd: OK Starting matrix: /etc/init.d/S50matrix-browser: line 12: warning: setlocale: LC_ALL: cannot change locale (zh_CN.utf8): No such file or directory Starting pulseaudio: Date: 1970-01-01 CST [08:00:03.885] weston 13.0.1 https://wayland.freedesktop.org Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/ Build: 13.0.1 [08:00:03.885] Command line: /usr/bin/weston [08:00:03.885] OS: Linux, 5.10.209, #1 SMP Thu Feb 13 10:19:48 CST 2025, aarch64 [08:00:03.885] Flight recorder: enabled [08:00:03.885] warning: XDG_RUNTIME_DIR /var/run is not configured correctly. Unix access mode must be 0700 (current mode is 0755), and must be owned by the user UID 0 (current owner is UID 0). Refer to your distribution on how to get it, or http://www.freedesktop.org/wiki/Specifications/basedir-spec on how to implement it. [08:00:03.886] Using config file /etc/xdg/weston/weston.ini [08:00:03.886] Output repaint window is -1 ms maximum. [08:00:03.887] Loading module /usr/lib/libweston-13/drm-backend.so [08:00:03.890] initializing drm backend [08:00:03.890] Entering mirror mode. [08:00:03.890] Trying direct launcher... [08:00:03.891] using /dev/dri/card0 [08:00:03.891] DRM: does not support atomic modesetting [08:00:03.891] DRM: does not support GBM modifiers [08:00:03.891] DRM: does not support async page flipping [08:00:03.891] DRM: supports picture aspect ratio [08:00:03.894] Loading module /usr/lib/libweston-13/gl-renderer.so W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified). W: [pulseaudio] main.c: Compiled with DEPRECATED libsamplerate support! arm_release_ver: g13p0-01eac0, rk_so_ver: 10 [08:00:03.920] EGL version: 1.4 Valhall-g13p0-01eac0 [08:00:03.920] EGL vendor: ARM [08:00:03.920] EGL client APIs: OpenGL_ES [08:00:03.920] EGL features: EGL Wayland extension: yes context priority: yes buffer age: no partial update: yes swap buffers with damage: no configless context: yes surfaceless context: yes dmabuf support: modifiers [08:00:03.970] GL version: OpenGL ES 3.2 v1.g13p0-01eac0.11addb9882ee8209dc0912af75110af7 [08:00:03.970] GLSL version: OpenGL ES GLSL ES 3.20 [08:00:03.970] GL vendor: ARM [08:00:03.970] GL renderer: Mali-G610 [08:00:04.087] GL ES 3.2 - renderer features: read-back format: ARGB8888 glReadPixels supports y-flip: no wl_shm 10 bpc formats: yes wl_shm 16 bpc formats: no wl_shm half-float formats: yes internal R and RG formats: yes OES_EGL_image_external: yes wl_shm sub-image to texture: yes [08:00:04.088] Using GL renderer [08:00:04.103] event3 - adc-keys: is tagged by udev as: Keyboard [08:00:04.104] event3 - adc-keys: device is a keyboard [08:00:04.106] event1 - rockchip,dp1 rockchip,dp1: is tagged by udev as: Switch E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module module-alsa-card (argument: device_id1 nameplatform-hdmiin-sound card_namealsa_card.platform-hdmiin-sound namereg_failfalse tschedyes fixed_latency_rangeno ignore_dBno deferred_volumeyes use_ucmyes avoid_resamplingno card_propertiesmodule-udev-detect.discovered1): initialization failed. W: [pulseaudio] authkey.c: Failed to open cookie file /userdata/.pulse/.config/pulse/cookie: No such file or directory W: [pulseaudio] authkey.c: Failed to load authentication key /userdata/.pulse/.config/pulse/cookie: No such file or directory W: [pulseaudio] authkey.c: Failed to open cookie file /userdata/.pulse/.pulse-cookie: No such file or directory W: [pulseaudio] authkey.c: Failed to load authentication key /userdata/.pulse/.pulse-cookie: No such file or directory W: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead W: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead [08:00:04.173] event1 - not using input device /dev/input/event1 [08:00:04.175] event0 - rk805 pwrkey: is tagged by udev as: Keyboard [08:00:04.175] event0 - rk805 pwrkey: device is a keyboard [08:00:04.176] event4 - rockchip-hdmi0 rockchip-hdmi0: is tagged by udev as: Switch [08:00:04.230] event4 - not using input device /dev/input/event4 [08:00:04.232] event2 - rockchip,hdmiin rockchip,hdmiin: is tagged by udev as: Switch [08:00:04.276] event2 - not using input device /dev/input/event2 [08:00:04.316] libinput: configuring device adc-keys. [08:00:04.316] libinput: configuring device rk805 pwrkey. [08:00:04.317] Registered plugin API weston_drm_output_api_v1 of size 40 [08:00:04.317] Color manager: no-op [08:00:04.317] Compositor capabilities: arbitrary surface rotation: yes screen capture uses y-flip: yes cursor planes: yes arbitrary resolutions: no view mask clipping: yes explicit sync: yes color operations: yes presentation clock: CLOCK_MONOTONIC, id 1 presentation clock resolution: 0.000000001 s [08:00:04.317] Loading module /usr/lib/weston/desktop-shell.so [08:00:04.319] DRM: head HDMI-A-1 found, connector 432 is connected, EDID make GSM, model 27MP35, serial Supported EOTF modes: SDR [08:00:04.319] DRM: head DSI-1 found, connector 448 is connected, EDID make unknown, model unknown, serial Supported EOTF modes: SDR [08:00:04.319] DRM: head DSI-2 found, connector 450 is connected, EDID make unknown, model unknown, serial Supported EOTF modes: SDR [08:00:04.319] DRM: head DP-1 found, connector 452 is disconnected. [08:00:04.319] launching /usr/libexec/weston-keyboard [08:00:04.321] launching /usr/libexec/weston-desktop-shell [08:00:04.322] HDMI-A-1 using at least 2 buffers [08:00:04.322] Output HDMI-A-1 attempts EOTF mode: SDR [08:00:04.322] Output HDMI-A-1 using color profile: stock sRGB color profile [08:00:04.323] Chosen EGL config details: id: 9 rgba: 8 8 8 0 buf: 24 dep: 0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258) [08:00:04.323] Output HDMI-A-1 (crtc 71) video modes: 1920x108060.0, preferred, current, 148.5 MHz 1920x108060.0 16:9, 148.5 MHz 1920x1080i60.0, 74.2 MHz 1920x1080i60.0 16:9, 74.2 MHz 1920x108050.0 16:9, 148.5 MHz 1920x1080i50.0 16:9, 74.2 MHz 1600x90060.0, 108.0 MHz 1280x102460.0, 108.0 MHz 1152x86475.0, 108.0 MHz 1280x72060.0, 74.2 MHz 1280x72060.0 16:9, 74.2 MHz 1280x72050.0 16:9, 74.2 MHz 800x60075.0, 49.5 MHz 720x57650.0 16:9, 27.0 MHz 720x48059.9, 27.0 MHz 720x48059.9 16:9, 27.0 MHz [08:00:04.323] associating input device event3 with output HDMI-A-1 (none by udev) [08:00:04.323] associating input device event0 with output HDMI-A-1 (none by udev) [08:00:04.324] Output HDMI-A-1 changed to mirror output [08:00:04.324] Output HDMI-A-1 enabled with head(s) HDMI-A-1 [08:00:04.324] DSI-1 using at least 2 buffers [08:00:04.324] Output DSI-1 attempts EOTF mode: SDR [08:00:04.324] Output DSI-1 using color profile: stock sRGB color profile [08:00:04.324] Chosen EGL config details: id: 9 rgba: 8 8 8 0 buf: 24 dep: 0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258) [08:00:04.324] Output DSI-1 (crtc 115) video modes: 1024x60056.1, preferred, current, 45.0 MHz [08:00:04.324] associating input device event3 with output DSI-1 (none by udev) [08:00:04.324] associating input device event0 with output DSI-1 (none by udev) [08:00:04.324] Output DSI-1 enabled with head(s) DSI-1 [08:00:04.324] DSI-2 using at least 2 buffers [08:00:04.324] Output DSI-2 attempts EOTF mode: SDR [08:00:04.324] Output DSI-2 using color profile: stock sRGB color profile [08:00:04.325] Chosen EGL config details: id: 9 rgba: 8 8 8 0 buf: 24 dep: 0 stcl: 0 int: 0-1 type: win|pbf|swap_preserved vis_id: XRGB8888 (0x34325258) [08:00:04.325] Output DSI-2 (crtc 137) video modes: 1024x60056.1, preferred, current, 45.0 MHz [08:00:04.325] Output DSI-2 changed to mirror output [08:00:04.325] Output DSI-2 enabled with head(s) DSI-2 could not load cursor dnd-move could not load cursor dnd-move could not load cursor dnd-copy could not load cursor dnd-copy could not load cursor dnd-none could not load cursor dnd-none xkbcommon: ERROR: couldnt find a Compose file for locale en_US.UTF-8 (mapped to en_US.UTF-8) could not create XKB compose table for locale en_US.UTF-8. Disabiling compose QStandardPaths: runtime directory /var/run is not a directory, but a symbolic link to a directory permissions 0755 owned by UID 0 GID 0 Failure: No such entity OK Starting sshd: OK Starting vsftpd: OK Starting dnsmasq: dnsmasq: unknown interface uap0 FAIL Changing password for forlinx New password: Bad password: similar to username Retype password: passwd: password for forlinx changed by root adduser: user ftp in use fstrim: Starting fstrim process (1137)... xkbcommon: ERROR: couldnt find a Compose file for locale en_US.UTF-8 (mapped to en_US.UTF-8) could not create XKB compose table for locale en_US.UTF-8. Disabiling compose Starting input-event-daemon: done rootok3588-buildroot:/# [08:00:06.390] seeing the first app libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: known incorrect sRGB profile
rootok3588-buildroot:/# rootok3588-buildroot:/# rootok3588-buildroot:/# rootok3588-buildroot:/# rootok3588-buildroot:/# uname -a Linux ok3588-buildroot 5.10.209 #1 SMP Thu Feb 13 10:19:48 CST 2025 aarch64 GNU/Linux rootok3588-buildroot:/# rootok3588-buildroot:/# rootok3588-buildroot:/#
[END] 2025/2/13 15:11:23
