网站如何做seo规划2023年10月疫情恢复
1、前提
- iOS编译库需要三个架构,arm64,arm64e,x86_64，其中x86_64为模拟器所需
- iOS编译库需要下载xcode及对应的command line tool（执行命令时可以自动下载），下载失败需要去官网搜索下载
2、openssl
- 参考iOS如何编译OpenSSL静态库（openssl版本:1.1.1b）
- 执行配置命令（路径修改为要生成的目标架构文件夹路径）
-
./Configure iphoneos-cross --prefix=/Users/xxx/openssl-1.1.1b/openssl_armv7 - 修改makefile以下项目：
- 真机（arm64为例，arm64e修改其中arm64为arm64e一致）
# sdk上层路径
CROSS_TOP=/Users/relly/Downloads/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer
# sdk文件
CROSS_SDK=iPhoneOS12.1.sdkCROSS_COMPILE=
CC=/Users/relly/Downloads/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang -arch arm64
CXX=
CPPFLAGS=
CFLAGS=-DDSO_DLFCN -DHAVE_DLFCN_H -DNDEBUG -DOPENSSL_THREADS -DOPENSSL_NO_STATIC_ENGINE -DOPENSSL_PIC -DOPENSSLDIR="\"$(OPENSSLDIR)\"" -DENGINESDIR="\"$(ENGINESDIR)\"" -O3 -D_REENTRANT -isysroot $(CROSS_TOP)/SDKs/$(CROSS_SDK) -fno-common - 模拟器
# sdk上层路径
CROSS_TOP=/Users/relly/Downloads/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer
# sdk文件
CROSS_SDK=iPhoneSimulator12.1.sdkCROSS_COMPILE=
CC=/Users/relly/Downloads/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang -arch x86_64
CXX=
CPPFLAGS=
CFLAGS=-DDSO_DLFCN -DHAVE_DLFCN_H -DNDEBUG -DOPENSSL_THREADS -DOPENSSL_NO_STATIC_ENGINE -DOPENSSL_PIC -DOPENSSLDIR="\"$(OPENSSLDIR)\"" -DENGINESDIR="\"$(ENGINESDIR)\"" -O3 -D_REENTRANT -isysroot $(CROSS_TOP)/SDKs/$(CROSS_SDK) -fno-common
- 真机（arm64为例，arm64e修改其中arm64为arm64e一致）
- 执行合并库命令
-
lipo -create ../openssl_arm64/lib/libcrypto.a ../openssl_arm64e/lib/libcrypto.a ../openssl_x86_64/lib/libcrypto.a -output ./libcrypto.a
-
lipo -create ../openssl_arm64/lib/libssl.a ../openssl_arm64e/lib/libssl.a ../openssl_x86_64/lib/libssl.a -output ./libssl.a
-
3、curl
- 修改此脚本中的路径为openssl所编译路径后，赋予执行权限执行即可:
#!/bin/shmake distcleanCONFIGURE_FLAGS="--disable-shared --disable-frontend"ARCHS="arm64 arm64e x86_64"# directories
# SOURCE是下载的第三方库源码包，解压后的目录，可以把sh脚本放到这个目录，source改为""
SOURCE=""
# FAT是所有指令集build后，输出的目录，所有静态库被合并成一个静态库
FAT="fat-libtool"# SCRATCH是下载源码包，解压后的目录
SCRATCH="./"
# must be an absolute path
# THIN 各自指令集build后输出的静态库所在的目录，每个指令集为一个静态库
THIN=`pwd`/"thin-libtool"COMPILE="y"
LIPO="y"if [ "$*" ]
then
if [ "$*" = "lipo" ]
then
# skip compile
COMPILE=
else
ARCHS="$*"
if [ $# -eq 1 ]
then
# skip lipo
LIPO=
fi
fi
fiif [ "$COMPILE" ]
then
CWD=`pwd`
echo "$CWD/$SOURCE........."
for ARCH in $ARCHS
do
echo "building $ARCH..."
mkdir -p "$SCRATCH/$ARCH"
cd "$SCRATCH/$ARCH"if [ "$ARCH" = "i386" -o "$ARCH" = "x86_64" ]
then
PLATFORM="iPhoneSimulator"
if [ "$ARCH" = "x86_64" ]
then
SIMULATOR="-mios-simulator-version-min=7.0"
HOST=x86_64-apple-darwin
else
SIMULATOR="-mios-simulator-version-min=5.0"
HOST=i386-apple-darwin
fi
else
PLATFORM="iPhoneOS"
SIMULATOR=
HOST=arm-apple-darwin
fiXCRUN_SDK=`echo $PLATFORM | tr '[:upper:]' '[:lower:]'`
CC="xcrun -sdk $XCRUN_SDK clang -arch $ARCH"
#AS="$CWD/$SOURCE/extras/gas-preprocessor.pl $CC"
CFLAGS="-stdlib=libc++ -static -arch $ARCH $SIMULATOR"
CXXFLAGS="$CFLAGS"
LDFLAGS="$CFLAGS"if [ "$ARCH" = "arm64" ]
then
echo 11
SSL_PATH="--with-openssl=/Users/relly/Lib/IOS/openssl-1.1.1t-modified/build/openssl_arm64"
fiif [ "$ARCH" = "arm64e" ]
then
echo 22
SSL_PATH="--with-openssl=/Users/relly/Lib/IOS/openssl-1.1.1t-modified/build/openssl_arm64e"
fiif [ "$ARCH" = "x86_64" ]
then
echo 33
SSL_PATH="--with-openssl=/Users/relly/Lib/IOS/openssl-1.1.1t-modified/build/openssl_x86_64"
fiecho $SSL_PATH
echo " $ARCH ------------------------- $SSL_PATH" CC=$CC $CWD/$SOURCE/configure $SSL_PATH --disable-ldap \
$CONFIGURE_FLAGS \
--host=$HOST \
--prefix="$THIN/$ARCH" \
CC="$CC" CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS"make -j3 install
cd $CWD
done
fiif [ "$LIPO" ]
then
echo "building fat binaries..."
mkdir -p $FAT/lib
set - $ARCHS
CWD=`pwd`
cd $THIN/$1/lib
for LIB in *.a
do
cd $CWD
lipo -create `find $THIN -name $LIB` -output $FAT/lib/$LIB
donecd $CWD
cp -rf $THIN/$1/include $FAT
fi- 若出现compiler cannot create executables，执行命令指定xcode路径
sudo xcode-select --switch /Users/relly/Downloads/Xcode.app/Contents/Developer/