当前位置： 首页 > news >正文

宿迁网站seo软文时光发稿平台

news 2026/4/6 21:22:59
宿迁网站seo,软文时光发稿平台,wordpress 标签,小程序制作需要营业执照吗Excel制作 新建一个Excel，后缀为“.xls” 工作本名称改为“CAN_Matrix” 在首行按照列来起名字，在里面只需要填写必须的内容即可。 列数名称第0列Message Name第1列Message Format第2列Message ID第3列Message Length (byte)第4列Message Transmitte…

Excel制作

新建一个Excel，后缀为“.xls”

工作本名称改为“CAN_Matrix”

在首行按照列来起名字，在里面只需要填写必须的内容即可。

列数名称
第0列Message Name
第1列Message Format
第2列Message
ID
第3列Message
Length
(byte)
第4列Message Transmitter
ECU
第5列Message Receiver
ECU
第6列Message Send Method
第7列Message Cycle Period(ms)
第8列Message Cycle Period Fast(ms)
第9列Message Delay Time(ms)
第10列Message IL Support 
第11列Message Num Of Repetition
第12列Message Start Delay Time(ms)
第13列NM Message
第14列CANFD BRS
第15列Message Comment
第16列Signal Name
第17列Signal
Length
(Bit)
第18列Signal Start Bit
第19列Singal Byte
Order
第20列Signal Unit
第21列Signal Data Type
第22列Signal Resolution
第23列Signal OffSet
第24列Signal Min
Value
第25列Signal Max Value
第26列Singal Inactive Value
第27列Singal Send Method
第28列Singal Start Value
第29列NWM- Wakeup Allowed
第30列Signal Value Descriptions
第31列Signal Comment

代码源码

# encoding='utf-8'
import xlrd
from decimal import Decimalimport sys
global Table        #表格
global RowCount     #行数
global ColumnCount  #列数
global OutputFile   #输出文件ExcelTable = "CAN_Matrix"   #表格
Note = "xin1"               #节点名称MessageName_Position = 0 #报文名称序号
MessageFormat_Position = 1 #报文格式序号
MessageID_Position = 2 #报文ID序号
MessageLength_Position = 3 #报文长度序号
MessageTransmitterNote_Position = 4 #报文发送节点序号
MessageReceiverNote_Position = 5 #报文接收节点序号
MessageSendMethod_Position  = 6 #报文发送方式序号
MessagePeriod_Position = 7 #报文周期序号
MessagePeriodFast_Position = 8 #报文快速周期序号
MessageDelayTime_Position = 9 #报文延迟时间序号
MessageILSupport_Position = 10 #报文支持IL序号
MessageNumOfRepetition_Position = 11 #报文重发次数序号
MessageStartDelayTime_Position = 12 #报文开始延迟时间序号
MessageNM_Position = 13 #报文网络管理序号
MessageCANFDBRS_Position = 14 #报文CANFDBRS序号
MessageComment_Position = 15 #报文注释序号SignalName_Position = 16 #信号名称序号
SignalStartLength_Position = 17 #信号长度序号
SignalStartBit_Position = 18 #信号起始位序号
SignalByteOrder_Position = 19 #信号字节序序号
SignalUnit_Position = 20 #信号单位序号
SignalDataType_Position = 21 #信号数据类型序号
SignalResolution_Position = 22 #信号比率序号
SignalOffset_Position = 23 #信号偏移序号
SignalMinValue_Position = 24 #信号最小值序号
SignalMaxValue_Position = 25 #信号最大值序号
SingalInactiveValue_Position = 26 #信号未激活值序号
SingalSendMethod_Position = 27 #信号发送方式序号
SingalStartValue_Position = 28 #信号开始值序号
SingalNWMWakeupAllowed_Position = 29 #信号网管唤醒序号
SignalValueDescriptions_Position = 30 #信号数值描述序号
SignalComment_Position = 31 #信号标注序号def remove_exponent(num):  # 去掉读取到的数值的小数点后边的0return num.to_integral() if num == num.to_integral() else num.normalize()def Read_Base_Infomation(): # 获取基本信息global Table        #表格global RowCount     #行数global ColumnCount  #列数global OutputFile   #输出文件if len(sys.argv) > 1:InputFilePath = sys.argv[1]else:InputFilePath = "DBCDemo.xls"#print(f"InputFilePath:{InputFilePath}\n")LastIndex = InputFilePath.rfind('\\')StartIndex = InputFilePath.find('.xls', LastIndex)InputFileSuffix = InputFilePath[LastIndex + 1:]#print(f"InputFileSuffix:{InputFileSuffix}\n")Xlsx = xlrd.open_workbook(InputFileSuffix)    # 找到输入文件Table = Xlsx.sheet_by_name(ExcelTable)  # 找到sheetRowCount = Table.nrows                  # 提取行数ColumnCount = Table.ncols               # 提取列数InputFileNoSuffix = InputFilePath[LastIndex + 1:StartIndex - 3]#输出文件#print(f"InputFileNoSuffix:{InputFileNoSuffix}\n")OutputFile = InputFileNoSuffix + ".dbc"#print(f"OutputFile:{OutputFile}\n")def Output_DBC_Head():#打印文件头部global OutputFile   #输出文件with open(OutputFile, "w",encoding="utf-8") as f:f.write("VERSION \"\"")f.write("\n\n")f.write('''
NS_ : NS_DESC_CM_BA_DEF_BA_VAL_CAT_DEF_CAT_FILTERBA_DEF_DEF_EV_DATA_ENVVAR_DATA_SGTYPE_SGTYPE_VAL_BA_DEF_SGTYPE_BA_SGTYPE_SIG_TYPE_REF_VAL_TABLE_SIG_GROUP_SIG_VALTYPE_SIGTYPE_VALTYPE_BO_TX_BU_BA_DEF_REL_BA_REL_BA_DEF_DEF_REL_BU_SG_REL_BU_EV_REL_BU_BO_REL_SG_MUL_VAL_BS_:\n\n''')f.write(f"BU_: {Note}\n\n\n")def Output_MessageMappingSignal():#报文和信号映射关系global Table        #表格global RowCount     #行数global OutputFile   #输出文件with open(OutputFile, "a+",encoding="utf-8") as f:i = 1 #跳过表头while i < RowCount:#逐行轮询MessageName = Table.cell_value(i, MessageName_Position)# 报文名称if MessageName == "":   # 本行为空print(f"Empty Message exists\n")returnelse:                   # 本行有内容#MessageID = Table.cell_value(i, MessageID_Position)MessageID = int((Table.cell_value(i, MessageID_Position)), 16)# 报文ID十六进制#print(f"MessageID:{MessageID}\n")MessageLength = remove_exponent(Decimal(Table.cell_value(i, MessageLength_Position)).quantize(Decimal("0")))# 报文长度MessageTransmitterNote = Table.cell_value(i, MessageTransmitterNote_Position)# 报文发送节点MessageReceiverNote = Table.cell_value(i, MessageReceiverNote_Position)# 报文接收节点if MessageTransmitterNote == Note :# 写入报文ID信息f.write(f"BO_ {MessageID} {MessageName}: {MessageLength} {Note}\n")  else:f.write(f"BO_ {MessageID} {MessageName}: {MessageLength} Vector__XXX\n")               while 1:#扫描这个报文里面的所有信号if (i == RowCount) or (MessageID != int((Table.cell_value(i, MessageID_Position)), 16)):#后面没有该报文的信号或者已经到尽头f.write("\n")breakelse:# 后面还有该报文的信号SingleName = Table.cell_value(i, SignalName_Position)#信号名称#print(f"SingleName:{SingleName}\n")SignalStartBit = remove_exponent(Decimal(Table.cell_value(i, SignalStartBit_Position)).quantize(Decimal("0")))#信号起始位，去除小数点后边的0以及保留小数点后O位#print(f"SignalStartBit:{SignalStartBit}\n")SignalLength = remove_exponent(Decimal(Table.cell_value(i, SignalStartLength_Position)).quantize(Decimal("0"))) #信号长度#print(f"SignalLength:{SignalLength}\n")if Table.cell_value(i, SignalByteOrder_Position) == "Motorola MSB" or Table.cell_value(i, SignalByteOrder_Position) == "Motorola" or Table.cell_value(i, SignalByteOrder_Position) == "":#信号字节序SignalByteOrder = "@0"else:SignalByteOrder = "@1"#print(f"SignalByteOrder:{SignalByteOrder}\n")if Table.cell_value(i, SignalDataType_Position) == "Unsigned" or Table.cell_value(i, SignalDataType_Position) == "unsigned" or Table.cell_value(i, SignalDataType_Position) == "":#信号有无符号SignalDateType = "+"else:SignalDateType = "-"#print(f"SignalDateType:{SignalDateType}\n")if Table.cell_value(i, SignalUnit_Position) == "":#信号单位SignalUnit = ""else:SignalUnit = Table.cell_value(i, SignalUnit_Position)#print(f"SignalUnit:{SignalUnit}\n")if Table.cell_value(i, SignalResolution_Position) == "":#信号精度SignalResolution = 1else:SignalResolution = remove_exponent(Decimal(Table.cell_value(i, SignalResolution_Position)).quantize(Decimal("0.00000")))if Table.cell_value(i, SignalOffset_Position) == "":#信号偏移SignalOffset = 0else:SignalOffset = remove_exponent(Decimal(Table.cell_value(i, SignalOffset_Position)).quantize(Decimal("0.00000")))#print(f"SignalOffset:{SignalOffset}\n")                         if Table.cell_value(i, SignalOffset_Position) == "":SignalMinValue = 0;else:HexValue = str(Table.cell_value(i, SignalMinValue_Position))#信号最小值if HexValue.startswith('0x') or HexValue.startswith('0X'):SignalMinValue = int(HexValue, 16)  # 将字符串转换为10进制整数else:SignalMinValue = remove_exponent(Decimal(Table.cell_value(i, SignalMinValue_Position)).quantize(Decimal("0")))#print(f"SignalMinValue:{SignalMinValue}\n") if Table.cell_value(i, SignalMaxValue_Position) == "":SignalMaxValue = 0xFF;else:           HexValue = str(Table.cell_value(i, SignalMaxValue_Position))#信号最大值if HexValue.startswith('0x') or HexValue.startswith('0X'):SignalMaxValue = int(HexValue, 16)  # 将字符串转换为10进制整数else:SignalMaxValue = remove_exponent(Decimal(Table.cell_value(i, SignalMaxValue_Position)).quantize(Decimal("0")))        #print(f"SignalMaxValue:{SignalMaxValue}\n") if MessageTransmitterNote == Note :f.write(f" SG_ {SingleName} : {SignalStartBit}|{SignalLength}{SignalByteOrder}{SignalDateType} ({SignalResolution},{SignalOffset}) [{SignalMinValue}|{SignalMaxValue}] \"{SignalUnit}\" Vector__XXX\n")else :f.write(f" SG_ {SingleName} : {SignalStartBit}|{SignalLength}{SignalByteOrder}{SignalDateType} ({SignalResolution},{SignalOffset}) [{SignalMinValue}|{SignalMaxValue}] \"{SignalUnit}\" {Note} \n")    i = i + 1 #扫描下一行#print(f"i:{i}\n")f.write("\n")def Output_DBC_Comment(): global Noteglobal OutputFile   #输出文件with open(OutputFile, "a+", encoding="GB2312") as f:     f.write("""
BA_DEF_ SG_  "GenSigStartValue" FLOAT 0 100000000000;
BA_DEF_ SG_  "GenSigSendType" ENUM  "Cyclic","OnWrite","OnWriteWithRepetition","OnChange","OnChangeWithRepetition","IfActive","IfActiveWithRepetition","NoSigSendType","NotUsed","NotUsed","NotUsed","NotUsed","NotUsed";
BA_DEF_ SG_  "GenSigInactiveValue" INT 0 100000;
BA_DEF_ SG_  "NWM-WakeupAllowed" ENUM  "No","Yes";
BA_DEF_ BO_  "GenMsgSendType" ENUM  "Cyclic","NotUsed","NotUsed","NotUsed","NotUsed","Cyclic","NotUsed","IfActive","NoMsgSendType","NotUsed","vector_leerstring";
BA_DEF_ BO_  "GenMsgNrOfRepetition" INT 0 999999;
BA_DEF_ BO_  "GenMsgDelayTime" INT 0 1000;
BA_DEF_ BO_  "GenMsgCycleTime" INT 0 50000;
BA_DEF_ BO_  "GenMsgCycleTimeFast" INT 0 50000;
BA_DEF_ BO_  "GenMsgILSupport" ENUM  "No","Yes";
BA_DEF_ BO_  "NmMessage" ENUM  "no","yes";
BA_DEF_ BO_  "GenMsgStartDelayTime" INT 0 65535;
BA_DEF_ BU_  "NmStationAddress" INT 0 63;
BA_DEF_ BU_  "NmNode" ENUM  "no","yes";
BA_DEF_  "NmBaseAddress" HEX 1024 1087;
BA_DEF_ BO_  "CANFD_BRS" ENUM  "0","1";
BA_DEF_  "DBName" STRING ;
BA_DEF_  "BusType" STRING ;
BA_DEF_ BU_  "NodeLayerModules" STRING ;
BA_DEF_ BU_  "ECU" STRING ;
BA_DEF_ BU_  "CANoeJitterMax" INT 0 0;
BA_DEF_ BU_  "CANoeJitterMin" INT 0 0;
BA_DEF_ BU_  "CANoeDrift" INT 0 0;
BA_DEF_ BU_  "CANoeStartDelay" INT 0 0;
BA_DEF_ BO_  "VFrameFormat" ENUM  "StandardCAN","ExtendedCAN","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","reserved","StandardCAN_FD","ExtendedCAN_FD";
BA_DEF_DEF_  "GenSigStartValue" 0;
BA_DEF_DEF_  "GenSigSendType" "Cyclic";
BA_DEF_DEF_  "GenSigInactiveValue" 0;
BA_DEF_DEF_  "NWM-WakeupAllowed" "";
BA_DEF_DEF_  "GenMsgSendType" "NoMsgSendType";
BA_DEF_DEF_  "GenMsgNrOfRepetition" 0;
BA_DEF_DEF_  "GenMsgDelayTime" 0;
BA_DEF_DEF_  "GenMsgCycleTime" 0;
BA_DEF_DEF_  "GenMsgCycleTimeFast" 0;
BA_DEF_DEF_  "GenMsgILSupport" "Yes";
BA_DEF_DEF_  "NmMessage" "no";
BA_DEF_DEF_  "GenMsgStartDelayTime" 0;
BA_DEF_DEF_  "NmStationAddress" 0;
BA_DEF_DEF_  "NmNode" "no";
BA_DEF_DEF_  "NmBaseAddress" 1024;
BA_DEF_DEF_  "CANFD_BRS" "1";
BA_DEF_DEF_  "DBName" "";
BA_DEF_DEF_  "BusType" "";
BA_DEF_DEF_  "NodeLayerModules" "";
BA_DEF_DEF_  "ECU" "";
BA_DEF_DEF_  "CANoeJitterMax" 0;
BA_DEF_DEF_  "CANoeJitterMin" 0;
BA_DEF_DEF_  "CANoeDrift" 0;
BA_DEF_DEF_  "CANoeStartDelay" 0;
BA_DEF_DEF_  "VFrameFormat" "StandardCAN";
BA_ "BusType" "CAN FD";
""")f.write(f'BA_ "DBName" \"{Note}\";\n\n')def Output_SignalAttributes():#添加信号属性global Table        #表格global RowCount     #行数global OutputFile   #输出文件with open(OutputFile, "a+", encoding="utf-8") as f:#with open(OutputFile, "a+", encoding="GB2312") as f:  i = 1 #跳过表头while i < RowCount:#逐行轮询SingleName = Table.cell_value(i, SignalName_Position)#信号名称#print(f"SingleName:{SingleName}\n")MessageID = int((Table.cell_value(i, MessageID_Position)), 16)# 报文ID十六进制if Table.cell_value(i, SingalInactiveValue_Position) != "":#信号未激活值SingalInactiveValue = remove_exponent(Decimal(Table.cell_value(i, SingalInactiveValue_Position)).quantize(Decimal("0")))#print(f"SingalInactiveValue:{SingalInactiveValue}\n")f.write(f"BA_ \"GenSigInactiveValue\" SG_ {MessageID} {SingleName} {SingalInactiveValue};\n")if Table.cell_value(i, SingalSendMethod_Position) != "":#信号发送方式SingalSendMethod = Table.cell_value(i, SingalSendMethod_Position)#print(f"SingalSendMethod:{SingalSendMethod}\n")if SingalSendMethod == "Cyclic":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 0;\n")elif SingalSendMethod == "OnWrite":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 1;\n")elif SingalSendMethod == "OnWriteWithRepetition":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 2;\n")              elif SingalSendMethod == "OnChange":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 3;\n")elif SingalSendMethod == "OnChangeWithRepetition":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 4;\n")elif SingalSendMethod == "IfActive":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 5;\n")elif SingalSendMethod == "IfActiveWithRepetition":f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 6;\n")else:f.write(f"BA_ \"GenSigSendType\" SG_ {MessageID} {SingleName} 0;\n")if Table.cell_value(i, SingalStartValue_Position) != "":#信号开始值SingalStartValue = remove_exponent(Decimal(Table.cell_value(i, SingalStartValue_Position)).quantize(Decimal("0")))#print(f"SingalStartValue:{SingalStartValue}\n")f.write(f"BA_ \"GenSigStartValue\" SG_ {MessageID} {SingleName} {SingalStartValue};\n")if Table.cell_value(i, SingalNWMWakeupAllowed_Position) != "":#信号网管唤醒序号SingalNWMWakeupAllowed = Table.cell_value(i, SingalNWMWakeupAllowed_Position)#print(f"SingalNWMWakeupAllowed:{SingalNWMWakeupAllowed}\n")if SingalNWMWakeupAllowed == "Yes" or SingalNWMWakeupAllowed == "YES":f.write(f"BA_ \"NWM-WakeupAllowed\" SG_ {MessageID} {SingleName} 1;\n")else:f.write(f"BA_ \"NWM-WakeupAllowed\" SG_ {MessageID} {SingleName} 0;\n")              i = i + 1def Output_SignalValue():#打印信号值定义global RowCount     #行数global Table global OutputFile   #输出文件with open(OutputFile, "a+", encoding="utf-8") as f:i = 1 #跳过表头while i < RowCount:#逐行轮询if Table.cell_value(i, SignalName_Position) != "":MessageID = int((Table.cell_value(i, MessageID_Position)), 16)if Table.cell_value(i, SignalValueDescriptions_Position) != "":SingleName = Table.cell_value(i, SignalName_Position)SignalValueDescription = Table.cell_value(i, SignalValueDescriptions_Position).strip().replace("\r", "").split("\n")SignalValueDescription = list(reversed(SignalValueDescription))if SignalValueDescription != [""]:#处理列表元素使其生成DBC文件格式中一样的格式ELE = "\" ".join(SignalValueDescription).replace("0x","").replace(":"," \"")+"\""f.write(f"VAL_ {MessageID} {SingleName} {ELE} ;\n") i = i + 1      def Output_SignalComment():#添加信号注释global Table        #表格global RowCount     #行数global OutputFile   #输出文件with open(OutputFile, "a+", encoding="utf-8") as f:#信号注释，不提倡添加中文注释#with open(OutputFile, "a+", encoding="GB2312") as f:  i = 1 #跳过表头while i < RowCount:#逐行轮询if Table.cell_value(i, SignalName_Position) != "":MessageID = int((Table.cell_value(i, MessageID_Position)), 16)if Table.cell_value(i, SignalValueDescriptions_Position) != "":SingleName = Table.cell_value(i, SignalName_Position)if Table.cell_value(i, SignalComment_Position) != "":#信号标注序号SignalComment = Table.cell_value(i, SignalComment_Position).strip().replace("\n", "").replace("\r", "")f.write(f"CM_ SG_ {MessageID} {SingleName} \"{SignalComment}\";\n")i = i + 1def Output_MessageAttribute():#打印报文属性global RowCount     #行数global Tableglobal OutputFile   #输出文件with open(OutputFile, "a+",encoding="utf-8") as f:i = 1 #跳过表头while i < RowCount:#逐行轮询MessageID = int((Table.cell_value(i, MessageID_Position)), 16)# 报文IDif Table.cell_value(i, MessageFormat_Position) != "":# 报文格式MessageFormat = Table.cell_value(i, MessageFormat_Position)#print(f"MessageFormat:{MessageFormat}\n")if MessageFormat == "CAN Standard":  f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 0;\n")elif MessageFormat == "CAN Extended":               f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 1;\n") elif MessageFormat == "CAN FD Standard":              f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 14;\n")                      elif MessageFormat == "CAN FD Extended":              f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 15;\n")           else:              f.write(f"BA_ \"VFrameFormat\" BO_ {MessageID} 0;\n")  if Table.cell_value(i, MessageSendMethod_Position) != "":# 报文发送方式MessageSendMethod = Table.cell_value(i, MessageSendMethod_Position)#print(f"MessageSendMethod:{MessageSendMethod}\n")if MessageSendMethod == "Cyclic":f.write(f"BA_ \"GenMsgSendType\" BO_ {MessageID} 0;\n")   elif MessageSendMethod == "IfActive":           f.write(f"BA_ \"GenMsgSendType\" BO_ {MessageID} 7;\n")     else:f.write(f"BA_ \"GenMsgSendType\" BO_ {MessageID} 0;\n")     if Table.cell_value(i, MessagePeriod_Position) != "":            MessagePeriod = Table.cell_value(i, MessagePeriod_Position)if MessagePeriod != "Event":# 报文周期      MessagePeriod = remove_exponent(Decimal(Table.cell_value(i, MessagePeriod_Position)).quantize(Decimal("0")))                #print(f"MessagePeriod:{MessagePeriod}\n")f.write(f"BA_ \"GenMsgCycleTime\" BO_ {MessageID} {MessagePeriod};\n") if Table.cell_value(i, MessagePeriodFast_Position) != "":#报文快速周期 MessagePeriodFast = remove_exponent(Decimal(Table.cell_value(i, MessagePeriodFast_Position)).quantize(Decimal("0")))         f.write(f"BA_ \"GenMsgCycleTimeFast\" BO_ {MessageID} {MessagePeriodFast};\n") if Table.cell_value(i, MessageDelayTime_Position) != "":#报文延迟时间MessageDelayTime = remove_exponent(Decimal(Table.cell_value(i, MessageDelayTime_Position)).quantize(Decimal("0")))            f.write(f"BA_ \"GenMsgDelayTime\" BO_ {MessageID} {MessageDelayTime};\n")  if Table.cell_value(i, MessageILSupport_Position) != "":#报文支持IL序号MessageILSupport = Table.cell_value(i, MessageILSupport_Position)if MessageILSupport == "Yes" or MessageILSupport == "YES":f.write(f"BA_ \"GenMsgILSupport\" BO_ {MessageID} 1;\n") else:f.write(f"BA_ \"GenMsgILSupport\" BO_ {MessageID} 0;\n")    if Table.cell_value(i, MessageNumOfRepetition_Position) != "":#报文重发次数MessageNumOfRepetition = remove_exponent(Decimal(Table.cell_value(i, MessageNumOfRepetition_Position)).quantize(Decimal("0")))              f.write(f"BA_ \"GenMsgNrOfRepetition\" BO_ {MessageID} {MessageNumOfRepetition};\n") if Table.cell_value(i, MessageStartDelayTime_Position) != "":#报文开始延迟时间MessageStartDelayTime = remove_exponent(Decimal(Table.cell_value(i, MessageStartDelayTime_Position)).quantize(Decimal("0")))            f.write(f"BA_ \"GenMsgStartDelayTime\" BO_ {MessageID} {MessageStartDelayTime};\n") if Table.cell_value(i, MessageNM_Position) != "":#报文网络管理MessageNM = Table.cell_value(i, MessageNM_Position)        if MessageNM == "Yes" or MessageNM == "YES":f.write(f"BA_ \"NmMessage\" BO_ {MessageID} 1;\n") else:f.write(f"BA_ \"NmMessage\" BO_ {MessageID} 0;\n")if Table.cell_value(i, MessageCANFDBRS_Position) != "":#报文CANFDBRSMessageCANFDBRS = Table.cell_value(i, MessageCANFDBRS_Position)                                          if MessageCANFDBRS == "Yes" or MessageCANFDBRS == "YES":f.write(f"BA_ \"CANFD_BRS\" BO_ {MessageID} 1;\n") else:f.write(f"BA_ \"CANFD_BRS\" BO_ {MessageID} 0;\n")i = i + 1def Output_MessageComment():#打印报文注释global Table        #表格global RowCount     #行数global OutputFile   #输出文件with open(OutputFile, "a+", encoding="GB2312") as f:#打印报文注释  i = 1 #跳过表头while i < RowCount:#逐行轮询MessageID = int((Table.cell_value(i, MessageID_Position)), 16)# 报文IDMessageComment = Table.cell_value(i, MessageComment_Position)# 报文注释if MessageComment != "":f.write(f"CM_ BO_ {MessageID} \"{MessageComment}\";\n") i = i + 1if __name__ == "__main__" :print(f"Start")#打印的顺序不要乱，不然会打不开文件Read_Base_Infomation()Output_DBC_Head()Output_MessageMappingSignal()Output_SignalComment()Output_MessageComment() Output_DBC_Comment()  Output_SignalAttributes()Output_MessageAttribute()Output_SignalValue()print(f"Success!!")

http://www.hkea.cn/news/713752/

相关文章：

  • 贺州同城购物网站建设中国网站排名100
  • 黄骅港旅游景点爱站网seo工具包
  • 网站 图文混编提高网站搜索排名
  • 北京怀柔网站制作教育机构
  • 网站建设费 大创友链交换平台
  • o2o商城网站系统开发微信群拉人的营销方法
  • 帝国cms做淘宝客网站网页设计用什么软件
  • 营销型网站建设的优缺点视频优化软件
  • 珠海响应式网站建设推广公司网络营销发展方案策划书
  • 中国人自己的空间站每日英语新闻
  • 教师可以做网站吗seo常用工具包括
  • 武山建设局网站什么是seo
  • 做文案需要用到的网站全网模板建站系统
  • 苏州乡村旅游网站建设策划书网站建设百度推广
  • 12380网站建设情况总结百度浏览器入口
  • 直播网站开发要多久排行榜前十名
  • 网站备案完才能建站吗企业建站公司
  • 网站开发外包合同西安网站优化公司
  • 2022网页设计尺寸规范和要求怎么做seo关键词优化
  • 北京大学两学一做网站十大收益最好的自媒体平台
  • 网站开发服务费企业网站建设的一般要素
  • 台州企业网站制作公司郴州网站推广
  • 如何做移动端网站邮件营销
  • 网站制作佛山crm管理系统
  • 网站综合营销方案设计网页设计教程
  • 东莞做网站制作宁波技术好的企业网站制作
  • 广州做网站公司哪家好如何注册一个网站
  • 网站备案协议书互联网营销师证书含金量
  • 广州企业网站建设报价免费推广网站大全
  • 宁波网站排名怎么提交网址让百度收录