当前位置： 首页 > news >正文

影视公司招聘信息长沙官网seo服务

news 2026/4/7 10:33:57
影视公司招聘信息,长沙官网seo服务,个人网站运营怎么做,免费网站服务器软件下载大全ACAP组网所需的物理条件 1、无线AP---收发无线信号； 2、无线控制器(AC)---用来控制管理多个AP； 3、PoE交换机---能给AP实现网络连接和供电的交换机； 4、授权：默认AC管理的AP数量有限，买授权才能管控更多AP。 WLAN创建…

AC+AP组网所需的物理条件

1、无线AP---收发无线信号；
2、无线控制器(AC)---用来控制管理多个AP；
3、PoE交换机---能给AP实现网络连接和供电的交换机；
4、授权：默认AC管理的AP数量有限，买授权才能管控更多AP。

WLAN创建步骤

一、AP上线

二、WLAN业务配置下发

三、无线网络终端接入WLAN

四、WLAN业务数据转发

        WLAN网络中的数据包括控制报文（管理报文）和数据报文。控制报文是通过CAPWAP的控制隧道转发的，用户的数据报文分为隧道转发方式、直接转发方式。

隧道转发方式：用户数据报文-->AP（CAPWAP数据隧道封装后）-->AC-->转发到上层网络。

直接转发方式：用户数据报文-->AP（不经过AC）-->直接转发到上层网络。

网络拓扑图

代码段

system-view sysname R
interface GigabitEthernet 0/0/0 ip address 192.168.11.253 24system-view sysname SWdhcp enablevlan batch 10 11
interface GigabitEthernet 0/0/1port link-type accessport default vlan 11quit
interface GigabitEthernet 0/0/2port link-type trunkport trunk allow-pass vlan 10 11quit
interface GigabitEthernet 0/0/3port link-type trunkport trunk allow-pass vlan 10quit
interface Vlan 11ip address 192.168.11.254 24dhcp select interfacequitsystem-view 
sysname SW1vlan batch 10 11
interface GigabitEthernet 0/0/1 port link-type trunkport trunk allow-pass vlan 10 11quit
interface Ethernet 0/0/1port link-type trunkport trunk pvid vlan 10port trunk allow-pass vlan 10 11quit
interface Ethernet 0/0/2port link-type trunkport trunk pvid vlan 10port trunk allow-pass vlan 10 11quitsystem-view sysname ACdhcp enablevlan 10quit
interface GigabitEthernet 0/0/1 port link-type trunkport trunk pvid vlan 10port trunk allow-pass vlan 10quit
interface Vlan 10ip address 192.168.10.254 24dhcp select interfacequit
wlanregulatory-domain-profile name test-dcountry-code CNquitap-group name test-gregulatory-domain-profile test-dyquitap auth-mode mac-authap-id 1 ap-mac 00e0-fcee-6470ap-name test-ap1ap-group test-gyap-id 2 ap-mac 00e0-fc90-2b60ap-name test-ap2ap-group test-gyquitsecurity-profile name test-ssecurity wpa-wpa2 psk pass-phrase test@123 aesquitssid-profile name test-wssid test-wifiquitvap-profile name test-vapforward-mode direct-forward service-vlan vlan-id 11security-profile test-sssid-profile test-wquitap-group name test-gvap-profile test-vap wlan 1 radio allquit
capwap source interface Vlanif 10
quit

配置步骤及代码---代码解析

配基础有线网络配置

<Huawei>system-view
[Huawei] sysname R
[R-GigabitEthernet0/0/0] ip address 192.168.11.253 24

<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei] sysname SW
[SW] dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[SW] vlan batch 10 11
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW]interface GigabitEthernet 0/0/1
[SW-GigabitEthernet0/0/1] port link-type access
[SW-GigabitEthernet0/0/1] port default vlan 11
[SW-GigabitEthernet0/0/1] quit
[SW]interface GigabitEthernet 0/0/2
[SW-GigabitEthernet0/0/2] port link-type trunk
[SW-GigabitEthernet0/0/2] port trunk allow-pass vlan 10 11
[SW-GigabitEthernet0/0/2] quit
[SW]interface GigabitEthernet 0/0/3
[SW-GigabitEthernet0/0/3] port link-type trunk
[SW-GigabitEthernet0/0/3] port trunk allow-pass vlan 10
[SW-GigabitEthernet0/0/3] quit
[SW]interface Vlan 11
[SW-Vlanif11] ip address 192.168.11.254 24
[SW-Vlanif11] dhcp select interface
[SW-Vlanif11] quit

<SW1>system-view
Enter system view, return user view with Ctrl+Z.
[SW1]sysname SW1
[SW1] vlan batch 10 11
Info: This operation may take a few seconds. Please wait for a moment...done.  
[SW1]interface GigabitEthernet 0/0/1
[SW1-GigabitEthernet0/0/1] port link-type trunk
[SW1-GigabitEthernet0/0/1] port trunk allow-pass vlan 10 11
[SW1-GigabitEthernet0/0/1] quit
[SW1]interface Ethernet 0/0/1
[SW1-Ethernet0/0/1] port link-type trunk
[SW1-Ethernet0/0/1] port trunk pvid vlan 10
[SW1-Ethernet0/0/1] port trunk allow-pass vlan 10 11
[SW1-Ethernet0/0/1] quit
[SW1]interface Ethernet 0/0/2
[SW1-Ethernet0/0/2] port link-type trunk
[SW1-Ethernet0/0/2] port trunk pvid vlan 10
[SW1-Ethernet0/0/2] port trunk allow-pass vlan 10 11
[SW1-Ethernet0/0/2] quit

<AC6605>system-view 
Enter system view, return user view with Ctrl+Z.
[AC6605] sysname AC
[AC] dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[AC] vlan 10
Info: This operation may take a few seconds. Please wait for a moment...done.
[AC-vlan10] quit
[AC]interface GigabitEthernet 0/0/1
[AC-GigabitEthernet0/0/1] port link-type trunk
[AC-GigabitEthernet0/0/1] port trunk pvid vlan 10
[AC-GigabitEthernet0/0/1] port trunk allow-pass vlan 10
[AC-GigabitEthernet0/0/1] quit
[AC]interface Vlan 10
[AC-Vlanif10] ip address 192.168.10.254 24
[AC-Vlanif10] dhcp select interface
[AC-Vlanif10] quit

AP上线和业务配置

[AC]wlan
[AC-wlan-view] regulatory-domain-profile name test-d //创建域管理模板test-d
[AC-wlan-regulate-domain-test-d] country-code CN //国家代码选择中国
Info: The current country code is same with the input country code.
[AC-wlan-regulate-domain-test-d] quit
[AC-wlan-view] ap-group name test-g //创建AP组test-g
Info: This operation may take a few seconds. Please wait for a moment.done.
[AC-wlan-ap-group-test-g] regulatory-domain-profile test-d  //AP组的域管理模板是test-d
Warning: Modifying the country code will clear channel, power and antenna gain c
onfigurations of the radio and reset the AP. Continue?[Y/N]:y
[AC-wlan-ap-group-test-g]quit
[AC-wlan-view] ap auth-mode mac-auth  //AP的认证模式为MAC认证

AP离线加入

[AC-wlan-view] ap-id 1 ap-mac 00e0-fcee-6470  //AP的编号和MAC地址
[AC-wlan-ap-1] ap-name test-ap1  //AP的名字为test-ap1
[AC-wlan-ap-1] ap-group test-g //AP属于AP组test-g
Warning: This operation may cause AP reset. If the country code changes, it will
 clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC-wlan-ap-1]ap-id 2 ap-mac 00e0-fc90-2b60
[AC-wlan-ap-2] ap-name test-ap2
[AC-wlan-ap-2] ap-group test-g
Warning: This operation may cause AP reset. If the country code changes, it will
 clear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y
Info: This operation may take a few seconds. Please wait for a moment.. done.
[AC-wlan-ap-2]quit
[AC-wlan-view] security-profile name test-s  //安全模板的名字为test-s
[AC-wlan-sec-prof-test-s] security wpa-wpa2 psk pass-phrase test@123 aes //无线网密码是test@123，用AES加密。
[AC-wlan-sec-prof-test-s] quit
[AC-wlan-view] ssid-profile name test-w //ssid的模板名字为test-w
[AC-wlan-ssid-prof-test-w] ssid test-wifi //ssid的名称为test-wifi
Info: This operation may take a few seconds, please wait.done.
[AC-wlan-ssid-prof-test-w] quit
[AC-wlan-view] vap-profile name test-vap //vap模板的名字叫test-vap
[AC-wlan-vap-prof-test-vap] forward-mode direct-forward  //转发模式为直接转发
[AC-wlan-vap-prof-test-vap] service-vlan vlan-id 11 //服务VLAN的ID为11
Info: This operation may take a few seconds, please wait.done.
[AC-wlan-vap-prof-test-vap] security-profile test-s //调用安全模板test-s
Info: This operation may take a few seconds, please wait.done.
[AC-wlan-vap-prof-test-vap] ssid-profile test-w //调用SSID模板test-w
Info: This operation may take a few seconds, please wait.done.
[AC-wlan-vap-prof-test-vap] quit
[AC-wlan-view] ap-group name test-g
[AC-wlan-ap-group-test-g] vap-profile test-vap wlan 1 radio all //调用VAP模板test-vap，wlan所有频道
Info: This operation may take a few seconds, please wait...done.
[AC-wlan-ap-group-test-g] quit
[AC-wlan-view]capwap source interface Vlanif 10  //AC的capwap隧道源接口为vlan 10
[AC]quit

STA接入

测试验证




管理vlan和业务vlan通信正常。

http://www.hkea.cn/news/796887/

相关文章：

  • 课程建设网站设计源码爱站网反链查询
  • 安徽省建设业协会网站个人网页制作教程
  • 好的摄影网站推荐福州seo顾问
  • html做的好看的网站如何宣传推广产品
  • 微信手机网站制作怎么引流客源最好的方法
  • 宿州建设网站公司前端seo搜索引擎优化
  • 做王境泽表情的网站百度seo关键词优化排名
  • 怎么选择无锡网站建设虚拟主机搭建网站
  • 做原油期货关注什么网站搜索引擎优化是做什么
  • 微信小程序怎么制作游戏安卓优化清理大师
  • 胶南做网站初学者做电商怎么入手
  • 网站为什么要维护佛山网络营销推广
  • 国企网站建设报告怎么建造自己的网站
  • 免费做司考真题的网站余姚网站如何进行优化
  • 如何网站开发1688网站
  • 丽水专业网站建设价格青岛网站优化
  • 网站开发专业培训学校百度推广登录官网入口
  • 贵阳做网站公司网站热度查询
  • 做课件最好的素材网站考拉seo
  • 网站建设玖首选金手指seo网站优化收藏
  • 台州卓远做网站好不好广州seo教程
  • dz网站数据备份bt磁力猪
  • github 可以做网站吗360seo
  • 杭州 企业门户网站建设爱链
  • dj那个网站做的好长沙公司网络营销推广
  • 设计师培训招生视频黑帽seo联系方式
  • 做网上贸易哪个网站好西宁网站seo
  • 电子烟网站建设杯子软文营销300字
  • 广州企业网站制作怎么做营销推广
  • 网站建设服务器在香港郑州网站建设专业乐云seo