国外幼儿园网站模板推广代运营公司
本篇介绍使用轮询方式读取gpio状态来判断按键状态。
原理图如下
GPIO API
| API名称 | 说明 |
| hi_u32 hi_gpio_init(hi_void); | GPIO模块初始化 |
| hi_u32 hi_io_set_pull(hi_io_name id, hi_io_pull val); | 设置某个IO上下拉功能。 |
| hi_u32 hi_gpio_set_dir(hi_gpio_idx id, hi_gpio_dir dir); | 设置GPIO引脚方向，id参数用于指定引脚，dir参数用于指定输入或输出 |
| hi_u32 hi_gpio_get_input_val(hi_gpio_idx id, hi_gpio_value* val); | 获取某个IO管脚输入电平状态 |
修改D:\DevEcoProjects\test\src\vendor\rtplay\rt_hi3861\demo\BUILD.gn文件
# Copyright (c) 2023 Beijing HuaQing YuanJian Education Technology Co., Ltd
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License. import("//build/lite/config/component/lite_component.gni")lite_component("demo") {features = [#"base_00_helloworld:base_helloworld_example",#"base_01_led:base_led_example","base_02_loopkey:base_loopkey_example",]
}创建D:\DevEcoProjects\test\src\vendor\rtplay\rt_hi3861\demo\base_02_loopkey文件夹
文件夹中创建D:\DevEcoProjects\test\src\vendor\rtplay\rt_hi3861\demo\base_02_loopkey\base_loopkey_example.c文件D:\DevEcoProjects\test\src\vendor\rtplay\rt_hi3861\demo\base_02_loopkey\BUILD.gn文件
# Copyright (c) 2023 Beijing HuaQing YuanJian Education Technology Co., Ltd
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License. static_library("base_loopkey_example") {sources = ["base_loopkey_example.c",]include_dirs = ["//utils/native/lite/include","//kernel/liteos_m/kal/cmsis","//base/iot_hardware/peripheral/interfaces/kits","//vendor/hqyj/fs_hi3861/common/bsp/include"]
}/** Copyright (c) 2023 Beijing HuaQing YuanJian Education Technology Co., Ltd* Licensed under the Apache License, Version 2.0 (the "License");* you may not use this file except in compliance with the License.* You may obtain a copy of the License at** http://www.apache.org/licenses/LICENSE-2.0** Unless required by applicable law or agreed to in writing, software* distributed under the License is distributed on an "AS IS" BASIS,* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.* See the License for the specific language governing permissions and* limitations under the License.*/#include <stdio.h>
#include <unistd.h>#include "cmsis_os2.h"
#include "hi_gpio.h"
#include "hi_io.h"
#include "ohos_init.h"#define KEY1 HI_IO_NAME_GPIO_6 // 对应按键key1
#define KEY2 HI_IO_NAME_GPIO_5 // 对应按键key2osThreadId_t Task1_ID = 0; // 任务1 ID
hi_gpio_value val1, val1_last, val2, val2_last; // GPIO的状态值
#define TASK_STACK_SIZE 1024
#define TASK_DELAY_TIME (200 * 1000)/*** @description: 任务1* @param {*}* @return {*}*/
void Task1(void)
{printf("enter Task 1.......\r\n");hi_gpio_init(); // GPIO初始化hi_io_set_pull(KEY1, HI_IO_PULL_UP); // 设置GPIO上拉hi_io_set_func(KEY1, HI_IO_FUNC_GPIO_6_GPIO); // 设置IO16为GPIO功能hi_gpio_set_dir(KEY1, HI_GPIO_DIR_IN); // 设置GPIO为输入模式hi_io_set_pull(KEY2, HI_IO_PULL_UP); // 设置GPIO上拉hi_io_set_func(KEY2, HI_IO_FUNC_GPIO_5_GPIO); // 设置IO15为GPIO功能hi_gpio_set_dir(KEY2, HI_GPIO_DIR_IN); // 设置GPIO为输入模式while (1) {hi_gpio_get_input_val(KEY1, &val1); // 获取GPIO引脚的状态if (val1 != val1_last) {// 当GPIO状态改变的时候, 打印输出printf("key1Value: %s\r\n", val1 ? "HI_GPIO_VALUE_1" : "HI_GPIO_VALUE_0");val1_last = val1;}hi_gpio_get_input_val(KEY2, &val2); // 获取GPIO引脚的状态if (val2 != val2_last) {// 当GPIO状态改变的时候, 打印输出printf("key2Value: %s\r\n", val2 ? "HI_GPIO_VALUE_1" : "HI_GPIO_VALUE_0");val2_last = val2;}// 200ms一检测usleep(TASK_DELAY_TIME); // 200ms sleep}
}/*** @description: 初始化并创建任务* @param {*}* @return {*}*/
static void base_key_demo(void)
{printf("[demo] Enter base_key_demo()!\r\n");osThreadAttr_t taskOptions;taskOptions.name = "Task1"; // 任务的名字taskOptions.attr_bits = 0; // 属性位taskOptions.cb_mem = NULL; // 堆空间地址taskOptions.cb_size = 0; // 堆空间大小taskOptions.stack_mem = NULL; // 栈空间地址taskOptions.stack_size = TASK_STACK_SIZE; // 栈空间大小 单位:字节taskOptions.priority = osPriorityNormal; // 任务的优先级:wqTask1_ID = osThreadNew((osThreadFunc_t)Task1, NULL, &taskOptions); // 创建任务1if (Task1_ID != NULL) {printf("ID = %d, Create Task1_ID is OK!\r\n", Task1_ID);}
}
SYS_RUN(base_key_demo);
目录结构
│ config.json
│
├─common
│ └─bsp
│ ├─include
│ └─src
├─demo
│ │ BUILD.gn
│ │
│ ├─base_00_helloworld
│ │ base_helloworld_example.c
│ │ BUILD.gn
│ │
│ ├─base_01_led
│ │ base_led_example.c
│ │ BUILD.gn
│ │
│ └─base_02_loopkey
│ base_loopkey_example.c
│ BUILD.gn
│
└─doc│ HarmonyOS开发板实验指导书 v2.1.pdf│ 华清远见 FS_Hi3861开发指导.md│ 华清远见 FS_Hi3861新手入门手册.md│├─board│ FS-Hi3861-V4.2.pdf│ FS-Hi3861QDB-V3.2.pdf│ hi-12f_kit_v1.1.0A7E6BCB9%A6-20211025.pdf│ hi-12f_v1.1.2-A7E6BCB9%A6-20211202.pdf│ nodemcu-hi-07s_12f-kit_v1.1-20210913.pdf│ RTplay2.01_2024-06-14.pdf│└─figures使用build，编译成功后，使用upload进行烧录。
运行效果如下，按下按键会有对应按键状态输出。
