当前位置： 首页 > news >正文

重庆网站推广报价hs网站推广

news 2026/4/7 3:48:08
重庆网站推广报价,hs网站推广,网站制作小常识,企业策划工作内容目录 1、R5为ISP，只能进行IP地址配置，其所有地址均配为公有IP地址。 IP配置 配置公网全网通 2、（1）R1和R5间使用PPP的PAP认证，R5为主认证方。 PAP认证 （2）R2与R5之间使用ppp的CHAP认证&am…

目录

1、R5为ISP，只能进行IP地址配置，其所有地址均配为公有IP地址。

IP配置

配置公网全网通

2、（1）R1和R5间使用PPP的PAP认证，R5为主认证方。

PAP认证

（2）R2与R5之间使用ppp的CHAP认证，R5为主认证方。

（3）R3与R5之间使用HDLC封装。

3、R1、R2、R3构建一个MGRE环境，R1为中心站点，R1、R4间为点到点的GRE。

构建隧道

配置NHRP

查看

配置GRE隧道

4、整个私有网络基于RIP全网可达。

RIP配置

开启R1Tunnel0/0/0口的伪广播功能

 关闭水平分割

 5、所有PC设置私有IP为源IP，可以访问R5环回，实现全网通。 

easy IP配置

1、R5为ISP，只能进行IP地址配置，其所有地址均配为公有IP地址。

IP配置

R1：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
Mar 29 2024 16:47:26-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]q
[R1]int s4/0/0
[R1-Serial4/0/0]ip add 15.1.1.1 24
[R1-Serial4/0/0]q
[R1]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.1.1/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       15.1.1.1/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R1]

R2：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R2
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.2.2 24
Mar 29 2024 16:49:49-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]q
[R2]int s4/0/0
[R2-Serial4/0/0]ip add 25.1.1.2 24
[R2-Serial4/0/0]q
[R2]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.2.2/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       25.1.1.2/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R2]

R3：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R3
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.3.3 24
[R3-GigabitEthernet0/0/0]
Mar 29 2024 16:52:19-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]q
[R3]int s4/0/0
[R3-Serial4/0/0]ip add 35.1.1.3 24
[R3-Serial4/0/0]q
[R3]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 3Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.3.3/24       up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial4/0/0                       35.1.1.3/24          up         up        
Serial4/0/1                       unassigned           down       down      
[R3]

R4：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R4
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 45.1.1.4 24
Mar 29 2024 16:54:35-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]q
[R4]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.4.4 24
Mar 29 2024 16:54:52-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R4-GigabitEthernet0/0/1]q
[R4]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 1Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              45.1.1.4/24          up         up        
GigabitEthernet0/0/1              192.168.4.4/24       up         up        
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
[R4]

ISP：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname ISP
[ISP]int s4/0/1
[ISP-Serial4/0/1]ip add 15.1.1.5 24
[ISP-Serial4/0/1]
Mar 29 2024 16:56:20-08:00 ISP %%01IFNET/4/LINK_STATE(l)[0]:The line protocol PP
P IPCP on the interface Serial4/0/1 has entered the UP state. 
[ISP-Serial4/0/1]q
[ISP]int s3/0/1
[ISP-Serial3/0/1]ip add 25.1.1.5 24
[ISP-Serial3/0/1]
Mar 29 2024 16:56:43-08:00 ISP %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PP
P IPCP on the interface Serial3/0/1 has entered the UP state. 
[ISP-Serial3/0/1]q
[ISP]int s4/0/0
[ISP-Serial4/0/0]ip add 35.1.1.5 24
[ISP-Serial4/0/0]
Mar 29 2024 16:57:01-08:00 ISP %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PP
P IPCP on the interface Serial4/0/0 has entered the UP state. 
[ISP-Serial4/0/0]q
[ISP]int g0/0/0
[ISP-GigabitEthernet0/0/0]ip add 45.1.1.5 24
Mar 29 2024 16:57:47-08:00 ISP %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IPon the interface GigabitEthernet0/0/0 has entered the UP state. 
[ISP-GigabitEthernet0/0/0]q
[ISP]int LoopBack 0
[ISP-LoopBack0]ip add 5.5.5.5 24
[ISP-LoopBack0]q
[ISP]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 6
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 6
The number of interface that is DOWN in Protocol is 3Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              45.1.1.5/24          up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         5.5.5.5/24           up         up(s)     
NULL0                             unassigned           up         up(s)     
Serial3/0/0                       unassigned           down       down      
Serial3/0/1                       25.1.1.5/24          up         up        
Serial4/0/0                       35.1.1.5/24          up         up        
Serial4/0/1                       15.1.1.5/24          up         up        
[ISP]

PC1：

PC2：

PC3：

PC4：

配置公网全网通

R1：

[R1]ip route-static 0.0.0.0 0 15.1.1.5

R2：

[R2]ip route-static 0.0.0.0 0 25.1.1.5

R3：

[R3]ip route-static 0.0.0.0 0 35.1.1.5

R4：

[R4]ip route-static 0.0.0.0 0 45.1.1.5


2、（1）R1和R5间使用PPP的PAP认证，R5为主认证方。

PAP认证

ISP为主认证方，所以在ISP上配置账户：

R5：

[ISP]aaa
[ISP-aaa]local-user a1 password cipher a12345
Info: Add a new user.
[ISP-aaa]local-user a1 service-type ppp
[ISP-aaa]q
[ISP]int s4/0/1
[ISP-Serial4/0/1]ppp authentication-mode pap

R1：

[R1]int s4/0/0
[R1-Serial4/0/0]ppp pap local-user a1 password cipher a12345

验证：

[R1-Serial4/0/0]shutdown 
Mar 29 2024 18:12:22-08:00 R1 %%01PPP/4/PHYSICALDOWN(l)[0]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. [R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PPPon the interface Serial4/0/0 has entered the DOWN state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:22-08:00 R1 %%01IFPDT/4/IF_STATE(l)[3]:Interface Serial4/0/0 h
as turned into DOWN state.
[R1-Serial4/0/0]undo shutdown 
[R1-Serial4/0/0]
Mar 29 2024 18:12:31-08:00 R1 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into UP state.
[R1-Serial4/0/0]
Mar 29 2024 18:12:34-08:00 R1 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol PPPon the interface Serial4/0/0 has entered the UP state. 
[R1-Serial4/0/0]
Mar 29 2024 18:12:34-08:00 R1 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the UP state. 
[R1-Serial4/0/0]

（2）R2与R5之间使用ppp的CHAP认证，R5为主认证方。

依然是R5为主，故在R5上配置账户：

R5：

[ISP]aaa
[ISP-aaa]local-user b1 password cipher b12345
Info: Add a new user.
[ISP-aaa]local-user b1 service-type ppp
[ISP-aaa]q
[ISP-Serial3/0/1]ppp authentication-mode chap

R2：

[R2]int s4/0/0
[R2-Serial4/0/0]ppp chap user b1	
[R2-Serial4/0/0]ppp chap password cipher b12345

验证：

[R2-Serial4/0/0]shutdown 
Mar 29 2024 18:17:41-08:00 R2 %%01PPP/4/PHYSICALDOWN(l)[0]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. [R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PPPon the interface Serial4/0/0 has entered the DOWN state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:41-08:00 R2 %%01IFPDT/4/IF_STATE(l)[3]:Interface Serial4/0/0 h
as turned into DOWN state.
[R2-Serial4/0/0]undo shutdown 
[R2-Serial4/0/0]
Mar 29 2024 18:17:50-08:00 R2 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into UP state.
[R2-Serial4/0/0]
Mar 29 2024 18:17:53-08:00 R2 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol PPPon the interface Serial4/0/0 has entered the UP state. 
[R2-Serial4/0/0]
Mar 29 2024 18:17:54-08:00 R2 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the UP state. 
[R2-Serial4/0/0]

（3）R3与R5之间使用HDLC封装。

R5：

[ISP]int s4/0/0
[ISP-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/CHANGE_ENCAP(l)[14]:The user performe
d the configuration that will change the encapsulation protocol of the link and 
then selected Y. 
[ISP-Serial4/0/0]
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01PPP/4/PHYSICALDOWN(l)[15]:On the interface Se
rial4/0/0, PPP link was closed because the status of the physical layer was Down
. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/LINK_STATE(l)[16]:The line protocol P
PP on the interface Serial4/0/0 has entered the DOWN state. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFNET/4/LINK_STATE(l)[17]:The line protocol P
PP IPCP on the interface Serial4/0/0 has entered the DOWN state. 
[ISP-Serial4/0/0]
Mar 29 2024 18:22:40-08:00 ISP %%01IFPDT/4/IF_STATE(l)[18]:Interface Serial4/0/0has turned into DOWN state.
[ISP-Serial4/0/0]
Mar 29 2024 18:22:41-08:00 ISP %%01IFPDT/4/IF_STATE(l)[19]:Interface Serial4/0/0has turned into UP state.
[ISP-Serial4/0/0]
Mar 29 2024 18:22:41-08:00 ISP %%01IFNET/4/LINK_STATE(l)[20]:The line protocol I
P on the interface Serial4/0/0 has entered the UP state. 
[ISP-Serial4/0/0]

R3：

[R3]int s4/0/0
[R3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/CHANGE_ENCAP(l)[0]:The user performed 
the configuration that will change the encapsulation protocol of the link and th
en selected Y. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01PPP/4/PHYSICALDOWN(l)[1]:On the interface Seri
al4/0/0, PPP link was closed because the status of the physical layer was Down. [R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPPon the interface Serial4/0/0 has entered the DOWN state. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol PPPIPCP on the interface Serial4/0/0 has entered the DOWN state. 
[R3-Serial4/0/0]
Mar 29 2024 18:23:02-08:00 R3 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h
as turned into DOWN state.
[R3-Serial4/0/0]
Mar 29 2024 18:23:03-08:00 R3 %%01IFPDT/4/IF_STATE(l)[5]:Interface Serial4/0/0 h
as turned into UP state.
[R3-Serial4/0/0]
Mar 29 2024 18:23:03-08:00 R3 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP 
on the interface Serial4/0/0 has entered the UP state. 
[R3-Serial4/0/0]

验证：

3、R1、R2、R3构建一个MGRE环境，R1为中心站点，R1、R4间为点到点的GRE。

构建隧道

首先配置MGRE隧道：

R1：

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.2.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/0]source 15.1.1.1
Mar 29 2024 18:33:05-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R1-Tunnel0/0/0]

R2：

[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip add 10.1.2.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R2-Tunnel0/0/0]source s4/0/0
Mar 29 2024 18:35:02-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state.

R3：

[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.2.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R3-Tunnel0/0/0]source s4/0/0
Mar 29 2024 18:36:12-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R3-Tunnel0/0/0]

配置NHRP

R1：

[R1-Tunnel0/0/0]nhrp network-id 100

R2：

[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register

R3：

[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register

查看

配置GRE隧道

R1：

[R1]int Tunnel 0/0/1
[R1-Tunnel0/0/1]ip add 10.1.1.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]destination 45.1.1.4

R4：

[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip add 10.1.1.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre	
[R4-Tunnel0/0/1]source 45.1.1.4
[R4-Tunnel0/0/1]destination 15.1.1.1

R1：

R4：

4、整个私有网络基于RIP全网可达。

RIP配置

R1：

[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]undo summary 	
[R1-rip-1]network 192.168.1.0        	
[R1-rip-1]network 10.0.0.0
[R1-rip-1]

R2:

[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo summary 
[R2-rip-1]network 192.168.2.0
[R2-rip-1]network 10.0.0.0

R3:

[R3]rip 1
[R3-rip-1]version 2
[R3-rip-1]undo summary 
[R3-rip-1]network 192.168.3.0
[R3-rip-1]network 10.0.0.0

R4:

[R4]rip 1
[R4-rip-1]v 2
[R4-rip-1]undo summary 
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 10.0.0.0

开启R1Tunnel0/0/0口的伪广播功能

[R1-Tunnel0/0/0]nhrp entry multicast dynamic

 关闭水平分割

水平分割 --- 从哪个接口学到的路由信息将不再从这个接口发出去。

故使用rip的路由器不能发送其他主机的路由信息，要实现全网通，我们就得关闭该功能。

R1：

[R1-Tunnel0/0/0]undo rip split-horizon

R2：

[R2-Tunnel0/0/0]undo rip split-horizon

R3：

[R3-Tunnel0/0/0]undo rip split-horizon

至此，R2和R3就能学习到其他的路由信息。

R2 ping 一下R3后再查看 NHRP表（因为两台路由器间没有发包可能不会更新NHRP表）：

R2：

R3：

 5、所有PC设置私有IP为源IP，可以访问R5环回，实现全网通。 

easy IP配置

R1：

[R1]acl 2000	
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]q
[R1]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000

检验：

 

R2：

[R2]acl 2000	
[R2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R2-acl-basic-2000]q
[R2]int s4/0/0
[R2-Serial4/0/0]nat outbound 2000

检验：

R3：

[R3]acl 2000	
[R3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R3-acl-basic-2000]q
[R3]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000

检验：

R4：

[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]q
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]nat outbound 2000

检验：

http://www.hkea.cn/news/874034/

相关文章：

  • 想把书放到二手网站如何做深圳seo关键词优化
  • 合肥网站优化排名推广合理使用说明
  • 如何网站专题策划互联网推广是什么
  • 用hadoop做网站日志分析推广工作的流程及内容
  • 凡科做网站技巧站长之家域名信息查询
  • 网站建设国际深圳网络营销课程ppt
  • 网站开发人员需要具备的能力电脑培训班多少费用
  • discuz集成wordpressseo的概念是什么
  • 子网站如何做网站营销方案模板
  • dreamweaver做的网站电商培训班一般多少钱
  • 国外做科研的网站东莞网站设计公司排名
  • 亿唐网不做网站做品牌原因seo网站诊断报告
  • 宝鸡网站建设东东怎么推广软件让别人下载
  • 21dove谁做的的网站百度一下首页设为主页
  • 猪八戒网站建设推广平台排名前十名
  • 广西建设质监站官方网站站长工具seo综合查询可以访问
  • 通用搭建网站教程优化营商环境的意义
  • 网站中加入地图怎样优化网站排名
  • 网站如何被搜索引擎收录地推推广平台
  • 池州做网站公司游戏搜索风云榜
  • 东丽区做网站网站查询平台
  • wordpress什么主题好用seo优化范畴
  • 局域网端口映射做网站西安竞价托管代运营
  • 重庆网站建设设计公司信息ip网站查询服务器
  • 网站积分的作用seo搜索引擎优化就业前景
  • 珠海网站品牌设计公司简介最新国内新闻重大事件
  • 广东专业网站客服软件定制站长统计app下载大全
  • 广东网站建设公司排名磁力帝
  • 胶南网站建设哪家好成都电脑培训班零基础
  • 集团网站建设哪家好网上推广怎么弄?